Author Index

A

  • Abbasi, Hamed The Study of Wing Damage Effect on Airplane Performance and Flight Dynamics [Volume 14, Issue 2, 2012, Pages 17-33]
  • Abbasi, Mohammad Sadegh ارائه مدل سنجش ارزیابی عملکردتعمیرات ونگهداری هواپیما با تلفیق مدل BSC و EFQM بر اساس روش فرآیند تحلیل شبکه ای فازی (FANP) ( مطالعه موردی : هواپیمایی جمهوری اسلامی ایران"هما") [Volume 15, Issue 1, 2013, Pages 23-40]
  • Abbasi, Pouya Position improvement of GPS/INS using NAR neural network and robust Kalman filter during GPS outage [Volume 21, Issue 2, 2019, Pages 46-56]
  • Abbasi, Yosef Double-Body UAV Non-Linear Control System Design [(Articles in Press)]
  • Abbasi, yousef Performance optimization of helicopter main rotor in maneuver using inverse simulation [Volume 24, Issue 2, 2022, Pages 37-51]
  • Abbasi, Yousef کنترل آرایش ربات‌های هوایی در مسیر معین مبتنی بر پردازش تصویر در شرایط نارسایی ارتباطی میان عضوی [Volume 15, Issue 1, 2013, Pages 55-68]
  • Abbasinasab, Moein Effect of Impactor Energy and Layers Thickness on Fiber Metal Laminates in Low Velocity Impact [Volume 16, Issue 2, 2014, Pages 73-82]
  • Abdolahipour, Soheila Investigation of synthetic jet actuator position in delaying separation of a supercritical airfoil [Volume 24, Issue 1, 2022, Pages 83-96]
  • Abdoli Hosseinabadi, Ayyob Improvement of Accuracy by Pre-launch Compensation with Earth’s Gravity and Rotation Rate for SINS [Volume 16, Issue 1, 2014, Pages 95-104]
  • Abdollahi Khoshmardan, saeed Identifying and prioritizing key factors affecting the management of complex megaprojects in the aircraft design & manufacturing industry [Volume 25, Issue 1, 2023, Pages 113-131]
  • Abedinejad, Mohammad Sadegh Analysis of Liquid Fuel Spray in an Evaporating Chamber [Volume 23, Issue 2, 2021, Pages 43-54]
  • Abedinejad, Mohammad Sadegh Analysis of Liquid Fuel Spray and Combustive Flow Characteristics inside a Combustion Chamber [(Articles in Press)]
  • Adamian, Armen Effect of small scale on nonlinear vibrations of viscoelastic circular microplate rested on nonlinear viscoelastic foundation [Volume 24, Issue 2, 2022, Pages 152-166]
  • Adavi, Hayatollah بررسی تجربی جریان ناپایا حول یک مدل استوانه بهمراه سه صفحه عمود برآن [Volume 19, Issue 1, 2017, Pages 35-49]
  • Aelaei, Mohammad Prioritizing the Factors Affecting on Success Implementation of Maintenance Program Using Multi-criteria Decision-Making Techniques [Volume 21, Issue 2, 2019, Pages 1-16]
  • Aghaei, Alireza Investigation of energy and exergy performance of parabolic trough solar collector with wind speed variations [Volume 23, Issue 1, 2021, Pages 109-124]
  • Aghnia, Mahdi Performance Analysis and Optimization of Micro-turbine Combustion Chamber by Numerical Simulation [Volume 16, Issue 2, 2014, Pages 47-62]
  • Aghnia, Mahdi شناسایی مولفه های موثر برای استقرار نگهداری مبتنی بر قابلیت اطمینان در یک سازمان هوایی [Volume 18, Issue 2, 2016, Pages 26-39]
  • Ahangarani Farahani, Alireza Low-order Linear Estimation of a Commercial Quadrotor using Flight [Volume 20, Issue 1, 2018, Pages 25-35]
  • Ahangarani Farahani, Alireza Trajectory Tracking Control of Quadrotor Using State Space Feedback by Optimal Gain Tuning [Volume 22, Issue 2, 2020, Pages 146-156]
  • Ahmadi, Mohammad بررسی تاثیر عوامل سازمانی بر عملکرد خلبانان مسافری با توجه به نقش تعدیلگر عوامل محیطی [Volume 18, Issue 2, 2016, Pages 69-84]
  • Ahmadian, Hamid A Ritz and Harmonic Balance Solution Method for Dynamic Simulation of a Continuous Rotating System Containing an Active Crack [Volume 12, Issue 2, 2010, Pages 56-63]
  • Ahmadizadeh, Yadolah Air Flow Control at a Boundary Layer Using a Surface Dielectric Barrier Discharge Actuator [Volume 12, Issue 1, 2010, Pages 59-67]
  • Ahmadizadeh, Yadolah Modeling of Multi-layer Microwave Absorber Structures for radar cross section [Volume 18, Issue 2, 2016, Pages 16-25]
  • Ahmadkhah, Anvar Performance Analysis and Optimization of Micro-turbine Combustion Chamber by Numerical Simulation [Volume 16, Issue 2, 2014, Pages 47-62]
  • Ahmadkhah, Anvar Numerical investigation of store separation from airplane wing, and study of the parameters, affecting the fall amount of store [Volume 19, Issue 2, 2017, Pages 44-54]
  • Akbari, Nozar Investigation of The Effect of Time Lag on Pressure Oscillations Amplitude Change in Premix Combustion [Volume 16, Issue 2, 2014, Pages 63-72]
  • Alaei, Mohammad Design, fabrication and aerodynamic analysis of a remote- controlled small airship model [Volume 22, Issue 1, 2020, Pages 12-29]
  • Amani, Iman Investigation, Simulation & Analysis of Downburst-Related Aircraft Accidents Using FDR Data [Volume 12, Issue 1, 2010, Pages 33-46]
  • Amani, Iman ساخت تستر نمایشگر و بررسی صحت عملکرد سیستم اجتناب از برخوردهای هوایی [Volume 15, Issue 2, 2013, Pages 75-85]
  • Aminian, Ehsan Numerical investigation of thermal and fluid analysis of the effect of flight altitude and porous metal foam on the oil cooler of training airplane [Volume 25, Issue 2, 2023, Pages 12-20]
  • Amiri, Mohammad Amin Improving Reliability of Processing Board of Cube Satellites by Modifying the Memory Structure [Volume 22, Issue 2, 2020, Pages 66-79]
  • Amoudzad Mahdiraji, Tahereh مطالعه موردی یخ‌زنی هواپیما در مسیرهای مختلف پروازی در ایران [Volume 15, Issue 2, 2013, Pages 15-24]
  • Ansari, Karim بررسی تجربی جریان هوا در لانه‌زنبوری یک تونل باد عمودی [Volume 15, Issue 1, 2013, Pages 13-21]
  • Anvari, Azar بررسی تجربی جریان هوا در لانه‌زنبوری یک تونل باد عمودی [Volume 15, Issue 1, 2013, Pages 13-21]
  • Arabian Arani, Ali Miss Distance Analysis of Proportional Navigation for High-Order Binomial Control Systems in Presence of Noise and Target Maneuvers [Volume 18, Issue 1, 2016, Pages 34-50]
  • Arabqomi, Hamid Design, manufacturing, and evaluation of mechanical and electrical properties of biodegradable epoxy/hemp composite produced by VARTM method [Volume 24, Issue 1, 2022, Pages 70-82]
  • Ardekani, Mohammad Ali Experimental investigation of air flow velocity distribution and its turbulences in an octagonal to square diffuser [Volume 14, Issue 2, 2012, Pages 67-76]
  • Ardekani, Mohammad Ali بررسی تجربی جریان هوا در لانه‌زنبوری یک تونل باد عمودی [Volume 15, Issue 1, 2013, Pages 13-21]
  • Ardekani, Mohammad Ali Experimental Investigation of the Effects of Variation in Guide Vanes Pitch and Curvature on Quality of Discharged Flow [Volume 16, Issue 2, 2014, Pages 83-93]
  • Asadi, Davood Flight Management System design for Emergency Conditions [Volume 17, Issue 1, 2015, Pages 53-64]
  • Asadi, Davood Multi-Objective Emergency Landing Trajectory Design Based on Motion Primitives [Volume 17, Issue 2, 2015, Pages 57-72]
  • Asadi, Davoud The Study of Wing Damage Effect on Airplane Performance and Flight Dynamics [Volume 14, Issue 2, 2012, Pages 17-33]
  • Asadolahi Ghohieh, Abdollah The Design and Calculation of Hydraulic Networks of Cooled Turbine Blades of the Jet Engine Using Graph Theory [Volume 13, Issue 1, 2011, Pages 63-73]
  • Asadollahi Ghohieh, Abdollah The Effect of Blade Surface Roughness on the Transonic 4-stage Axial Compressor Performance [Volume 14, Issue 2, 2012, Pages 1-10]
  • Asghari Tehrani, Pezhman بررسی تجربی جریان هوا در لانه‌زنبوری یک تونل باد عمودی [Volume 15, Issue 1, 2013, Pages 13-21]
  • Asgharzadeh- Bonab, Akbar Improve radar performance in cluttered environments by integrating pulse compression method and signal surface compensation algorithm [(Articles in Press)]
  • Aslinezhad, Mehdi Position improvement of GPS/INS using NAR neural network and robust Kalman filter during GPS outage [Volume 21, Issue 2, 2019, Pages 46-56]
  • Astaraki, Sohrab Experimental investigation of residual strength of aged aircrat structures [Volume 19, Issue 2, 2017, Pages 66-76]
  • Astaraki, Sohrab Vibration and buckling analysis of longitudinally stiffened cylindrical shells under the axial static loading [Volume 21, Issue 1, 2019, Pages 57-69]
  • Avarzamani, Malihe Experimental study of sandwich panel strength with hourglass and square cell core under buckling load [Volume 24, Issue 2, 2022, Pages 27-36]
  • Azarafza, Reza Three-Point Bending Test and Experimental and Numerical Modal Testing of Sandwich Plates with Grid Stiffened Core [Volume 23, Issue 1, 2021, Pages 125-144]
  • Azarafza, Reza Fabrication and Testing of Composite Flange Using Experimental and Numerical Methods [Volume 25, Issue 2, 2023, Pages 34-47]
  • Azizi, Amir Parametric Optimization of Augmented Proportional Navigation Law Considering Performance and Maneuvering Capabilities [Volume 17, Issue 1, 2015, Pages 65-74]

B

  • Babaei, Alireza Continuous Curvature Trajectory Planning Based on Dubins Path and Bézier Curve for UAVs [Volume 16, Issue 1, 2014, Pages 49-64]
  • Babaei pouladi, Laya Experimental study of two-dimensional and axisymmetric pneumatic contact grippers for limp and porous materials [Volume 23, Issue 2, 2021, Pages 124-135]
  • Babasafari, Parisa Experimental Investigation of the Effect of Different Arrangements of the Corona Plasma Actuator on Thrust produced on the Flat Plate [Volume 25, Issue 1, 2023, Pages 144-153]
  • Baghbani, Hadi The Technological Challenges in MAV Reconnaissance and the Method of Deal with Their Threats in the IRIAF [(Articles in Press)]
  • Bagheri, Morteza Investigation of a Method for Aerodynamic and Inertial Loading on Aircraft Finite Element Model Using Genetic Algorithm and Mapping [Volume 16, Issue 1, 2014, Pages 65-74]
  • Bagheri, Morteza Free Vibration Analysis of Longitudinally Stiffened Cylindrical Shells with Different Types of Boundary Conditions Using Analytical and Experimental Methods [Volume 18, Issue 1, 2016, Pages 1-11]
  • Bagherinouri, Mohammad Life Estimation of a Helicopter Main Rotor Shaft Based on Standard FAA Spectrum [Volume 13, Issue 2, 2011, Pages 49-58]
  • Baghersad, Rasoul Analytical and Experimental Studies of Cyclic Thermal Shock Effects on Nonlinear Behavior of Composite Laminates [Volume 14, Issue 2, 2012, Pages 1-16]
  • Bagherzadeh Valami, Hadi Evaluation the efficiency of Iran's airports by applying the two-stage Network of Data Envelopment Analysis method [Volume 19, Issue 2, 2017, Pages 12-28]
  • Bahaadini, Reza Vibration analyses of trapezoidal sandwich panel under supersonic flow [Volume 22, Issue 2, 2020, Pages 1-22]
  • Bahalou Horeh, Hassan A Ritz and Harmonic Balance Solution Method for Dynamic Simulation of a Continuous Rotating System Containing an Active Crack [Volume 12, Issue 2, 2010, Pages 56-63]
  • Bahmani, Asadollah A 3-D study of primary holes geometry effectiveness on film cooling efficiency and thrust of combustion chamber [Volume 13, Issue 2, 2011, Pages 35-47]
  • Bahman Jahromi, Iman Experimental investigation of Mach 6 optimal hypersonic nozzle performance in shock tunnel [Volume 25, Issue 2, 2023, Pages 21-33]
  • Bakhshandeh, Mohammad Experimental and Numerical Investigation of Vortex Generator effects on Flow Pattern and Aerodynamic Coefficients of an Airplane Wing Model [Volume 13, Issue 2, 2011, Pages 1-16]
  • Bakhshandeh, Mohammad Identifying the effective factors in aviation accident and providing an appropriate model [Volume 13, Issue 2, 2011, Pages 71-78]
  • Bakhshandeh, Mohammad Designing a flight database for increasing aviation safety [Volume 14, Issue 2, 2012, Pages 77-87]
  • Bakhshandeh, Mohammad ساخت تستر نمایشگر و بررسی صحت عملکرد سیستم اجتناب از برخوردهای هوایی [Volume 15, Issue 2, 2013, Pages 75-85]
  • Bandikonari, Hamid a [Volume 13, Issue 1, 2011, Pages 1-22]
  • Barati, Ehsan Investigation of 2-D Hot Ring Rolling Simulation and Effects of Different Parameters on Forming Process of Jet’s Spool [Volume 18, Issue 1, 2016, Pages 75-92]
  • Barati, Ehsan Strength analysis of aluminum matting plates welded by TIG welding process for airfield repair [Volume 20, Issue 2, 2018, Pages 16-26]
  • Basohbat Novinzadeh, Alireza a [Volume 13, Issue 1, 2011, Pages 1-22]
  • Basohbat Novinzadeh, Alireza کنترل آرایش ربات‌های هوایی در مسیر معین مبتنی بر پردازش تصویر در شرایط نارسایی ارتباطی میان عضوی [Volume 15, Issue 1, 2013, Pages 55-68]
  • Bayat, Meysab Navigation Accuracy Improvement Using a New Integrated Algorithm of TOA/TDOA in Ground-based Loran Systems [Volume 16, Issue 2, 2014, Pages 33-46]
  • Bayat, Meysab Design and Simulation of a Linear Adaptive System to Eliminate the Effect of Single-frequency Jammer in Warplane Data Link [Volume 18, Issue 1, 2016, Pages 51-59]
  • Bayat, Reza Online path planning for missile in dynamic environment using a heuristic algorithm [Volume 25, Issue 2, 2023, Pages 114-128]
  • Bayat, Siavash A Model for Detecting Targets and Classifying Pulses of 6-Antenna Radar Systems with Neural Networks Optimized by Genetic Algorithm [Volume 24, Issue 2, 2022, Pages 78-93]
  • Bayat Tajvar, Reza Optimizing the Parameters of the Missile Tactical Guidance Law based on the Heuristic Gravitational Search Algorithm [Volume 21, Issue 2, 2019, Pages 29-35]
  • Bazzazzadeh, Mehrdad Experimental Investigation of The Flow Field Over a Non-Slender lambda Shaped Wing by Pressure Measurement [Volume 17, Issue 1, 2015, Pages 10-21]
  • Behnamgol, Vahid Nonlinear Robust Guidance in direction and perpendicular to the LOS for Intercepting Moving Targets [Volume 14, Issue 1, 2012, Pages 37-46]
  • Bohlouri, Vahid Satellite Attitude Control Using Modified PID Controller in the presence of Uncertainty [Volume 23, Issue 2, 2021, Pages 80-91]
  • Bohlouri, Vahid Improving a Satellite Attitude Control Using Fractional-Order Controller in the Presence of Environmental Disturbances [Volume 24, Issue 2, 2022, Pages 67-77]
  • Borjalilu, Naiemeh ارائه مدل سنجش ارزیابی عملکردتعمیرات ونگهداری هواپیما با تلفیق مدل BSC و EFQM بر اساس روش فرآیند تحلیل شبکه ای فازی (FANP) ( مطالعه موردی : هواپیمایی جمهوری اسلامی ایران"هما") [Volume 15, Issue 1, 2013, Pages 23-40]
  • Borjalilu, Naimeh Flightsafety Criteria to assess the safety performance of cockpit crew [Volume 25, Issue 2, 2023, Pages 142-154]
  • Bornasi, Saeed The Shimmy Vibration Analysis of Aircraft Landing Gear [Volume 13, Issue 2, 2011, Pages 59-69]
  • Bustan, Danyal Multiple actuator fault diagnosis based on parity space for quadrotor system [Volume 22, Issue 1, 2020, Pages 1-11]

C

  • Charlang Kiani, Kiarash بهبود اندرکنش موج ضربه ای و لایه مرزی در جریان گذر صوت با استفاده از برجستگی کنترل موج ضربه ای [Volume 15, Issue 1, 2013, Pages 69-82]
  • Chegeni, Mohsen Multi-Objective Optimization of Conventional Airplane Vertical Tail and Rudder [Volume 21, Issue 1, 2019, Pages 35-43]
  • Cheraghi, Akbar Simulation of Milling Process in Roughening of Compressor Blade in Air Engine by Use of Finite Element Analysis [Volume 12, Issue 1, 2010, Pages 47-57]
  • Cheraghi, Akbar Re-engineering of a Helicopter Structural Components Using Laminated Composite Materials Based on Crashworthiness Concepts [Volume 12, Issue 2, 2010, Pages 33-43]
  • Cheraghi, Akbar Modeling of Multi-layer Microwave Absorber Structures for radar cross section [Volume 18, Issue 2, 2016, Pages 16-25]

D

  • Dalili Oskouei, Hamidreza ساخت تستر نمایشگر و بررسی صحت عملکرد سیستم اجتناب از برخوردهای هوایی [Volume 15, Issue 2, 2013, Pages 75-85]
  • Darabi, Babak Effect of small scale on nonlinear vibrations of viscoelastic circular microplate rested on nonlinear viscoelastic foundation [Volume 24, Issue 2, 2022, Pages 152-166]
  • Darabi, Davoud a [Volume 13, Issue 1, 2011, Pages 1-22]
  • Darzi Ramandi, Milad Identification, Categories and risk assessment of the pilot training in job safety analysis [Volume 20, Issue 1, 2018, Pages 62-76]
  • Davar, Ali Three-Point Bending Test and Experimental and Numerical Modal Testing of Sandwich Plates with Grid Stiffened Core [Volume 23, Issue 1, 2021, Pages 125-144]
  • Davar, Ali Fabrication and Testing of Composite Flange Using Experimental and Numerical Methods [Volume 25, Issue 2, 2023, Pages 34-47]
  • Davarzani, Mohammad Investigating the effective factors on the implementation of the announced policies of the aviation and air transport sector Based upon the law of the country's 6th five-year development plan [Volume 25, Issue 1, 2023, Pages 91-112]
  • Davoudinik, Alireza Reliability based design optimization of energy harvester from UAV engine vibration [Volume 19, Issue 1, 2017, Pages 50-61]
  • Dehghan, Seyyed Mohammad Mahdi Low-order Linear Estimation of a Commercial Quadrotor using Flight [Volume 20, Issue 1, 2018, Pages 25-35]
  • Dehghan, Seyyed Mohammad Mehdi Multi-UAV persistent surveillance with basic patrolling pattern in minimum revisit time [Volume 20, Issue 1, 2018, Pages 1-12]
  • Dehghan, Seyyed Mohammad Mehdi Cooperative patrolling Scenario design providing the ability to focus on priority areas by a group of UAVs [Volume 22, Issue 2, 2020, Pages 240-257]
  • Dehghani, Mohsen Design, fabrication and aerodynamic analysis of a remote- controlled small airship model [Volume 22, Issue 1, 2020, Pages 12-29]
  • Dehghani Manshadi, Mojtaba Experimental Investigation of The Flow Field Over a Non-Slender lambda Shaped Wing by Pressure Measurement [Volume 17, Issue 1, 2015, Pages 10-21]
  • Dehghani mohammad-abadi, Mohsen Ring rolling work rolls life estimation by means of Manson-Halford-Haibach method [Volume 22, Issue 2, 2020, Pages 23-40]
  • Dehghani mohammad-abadi, Mohsen A State-Based Approach to Modeling Air Accidents Caused by Loss of Flight Control [Volume 22, Issue 2, 2020, Pages 157-170]
  • Dehghani mohammad-abadi, Mohsen Integrated Task Assignment and Path Planning with Moving Targets Based on an Innovative Linear Programming Approach and Dubins Curves [Volume 22, Issue 2, 2020, Pages 197-210]
  • Dehghani Mohammadabadi, Mohsen Energy absorption investigation of cylindrical tube filled by functionally graded foam in quasi static test [Volume 21, Issue 1, 2019, Pages 1-10]
  • Dehghani Mohammadabadi, Mohsen Enhancing corrosion resistance of helicopter skid shoes by HVOF method [(Articles in Press)]
  • Delalat, Meysam Aerial Target Tracking using Visual sensor and Laser finder [Volume 21, Issue 2, 2019, Pages 57-72]
  • Deziyanian, Amirhossein Non [Volume 14, Issue 2, 2012, Pages 35-48]
  • Djavareshkian, Mohammad Hassan Evaluation of aerodynamic performance of the geometrical twist by variation the Reynolds number in a flying wing [Volume 22, Issue 1, 2020, Pages 30-45]
  • Djavareshkian, Mohammad Hassan Frequency analysis and investigation of flow arrangement on two infinite wings with simple and sinusoidal leading-edges [Volume 22, Issue 2, 2020, Pages 227-239]
  • Djavareshkian, Mohammad Hassan Effect of Optimized Roughness Distribution Elements on the Behavior of Phase portrait Circuits in Critical Reynolds [Volume 23, Issue 2, 2021, Pages 55-67]
  • Djavareshkian, Mohammad Hassan Aerodynamic Investigation of Crow Flap Control System in a Flying Wing UAV Aircraft [(Articles in Press)]
  • Djavareshkian, Mohammad Hassan Numerical investigation of the AUSM-family in viscous and inviscid axisymmetric flow Field [Volume 25, Issue 1, 2023, Pages 1-15]
  • Doost Mahmoudi, Alireza بررسی تجربی اثرات یخ‌زدگی روی پارامترهای آیرودینامیکی ایرفویل NACA 23012 [Volume 15, Issue 2, 2013, Pages 37-50]
  • Dorostkar Yaghote, Behnam Fabrication And Optimization of CRLH-TL Antenna in control of Flight systems and airborne warning [Volume 25, Issue 2, 2023, Pages 155-166]

E

  • Ebrahimi, Abbas Experimental Analysis of a Flapping Aeroelastic Wing and Derivation of Genaralized Curves [Volume 14, Issue 1, 2012, Pages 13-25]
  • Ebrahimi, Atefeh Offering the model based on system dynamics for improvement of flight safety [Volume 17, Issue 2, 2015, Pages 44-56]
  • Ebrahimi, Masoud بهینه‌سازی طراحی چند موضوعی یک پرتابه، حامل پرنده بدون سرنشین پرتاب‌شونده از توپ [Volume 15, Issue 2, 2013, Pages 1-13]
  • Ebrahimi, Saeed The energy absorption characteristics of tapered honeycomb sandwich cylindrical columns under axial crushing loads [Volume 17, Issue 2, 2015, Pages 1-9]
  • Ebrahimian, Hamidreza Experimental Investigation of Grid Winglet Effects on Aerodynamic Characteristics of a Wing Model at Low Reynolds Number [Volume 16, Issue 2, 2014, Pages 1-14]
  • Edrisi, Mehdi A Novel Robust Proportional Navigation Guidance Law for Surface-to-Air Missile Based on Extended Kalman Filter [Volume 16, Issue 1, 2014, Pages 33-48]
  • Effatpanah Hesari, Mojtaba Reliability based design optimization of energy harvester from UAV engine vibration [Volume 19, Issue 1, 2017, Pages 50-61]
  • Elahi, Mustafa MIDCOURSE GUIDANCE A PROJECTILE OPTIMIZATION USING PARTICLE SWARM ALGORITHM [Volume 22, Issue 1, 2020, Pages 46-53]
  • Emami Saleh, Kourosh Non [Volume 14, Issue 2, 2012, Pages 35-48]
  • Esbati, Amirhossein The effect of design parameters on light aircraft flaps mechanism’s reliability [Volume 17, Issue 1, 2015, Pages 75-82]
  • Eshraghi, Hamzeh Experimental Investigation of the Effect of Different Arrangements of the Corona Plasma Actuator on Thrust produced on the Flat Plate [Volume 25, Issue 1, 2023, Pages 144-153]
  • Eshrat Abadi, Hassan Academic Entrepreneurship in the Field of Aviation of Iran: A Case Study of Shahid Sattari Aeronautical University Of Science and Technology [Volume 18, Issue 1, 2016, Pages 12-33]
  • Eshrat Abadi, Hassan Identification of instructor’s competencies in the field of aeronautics: The study of pilot’s instructors at Shahid Sattari Air University [Volume 20, Issue 1, 2018, Pages 36-48]
  • Eslami Haghighat, Zahra Experimental Investigation of Suddenly Stop of Supercritical Airfoil SC-0410 between Pitching Motion [Volume 23, Issue 2, 2021, Pages 29-42]
  • Esmaeili, Ali Frequency analysis and investigation of flow arrangement on two infinite wings with simple and sinusoidal leading-edges [Volume 22, Issue 2, 2020, Pages 227-239]
  • Esmaeili, Ali Investigation of Thickness, Camber and Maximum Proximity Effect on Infinite Wavy Wing [Volume 23, Issue 1, 2021, Pages 73-85]
  • Esmaeili, Ali Effect of Optimized Roughness Distribution Elements on the Behavior of Phase portrait Circuits in Critical Reynolds [Volume 23, Issue 2, 2021, Pages 55-67]
  • Esmaili, Reza Developing a media strategy in order to manage the air accident crisis [Volume 24, Issue 1, 2022, Pages 111-140]
  • Esmailkhah, Ahmad Modeling Jamming against Cruise Missile Considering Flat Earth Effect and jammer altitude in Electronic Warfare [Volume 24, Issue 1, 2022, Pages 27-36]

F

  • Faghani, Gholamreza طراحی و شبیه سازی کنترل پیش بین مدل برای کنترل سوخت موتور توربوجت موشک [Volume 19, Issue 1, 2017, Pages 1-12]
  • Fallah, Mohsen Prediction of stability lobes in milling of aluminum alloy 7075 using time series analysis [Volume 14, Issue 1, 2012, Pages 57-72]
  • Farahani Boghlani, Foad Experimental Investigation of the Effects of Variation in Guide Vanes Pitch and Curvature on Quality of Discharged Flow [Volume 16, Issue 2, 2014, Pages 83-93]
  • Faraji Moghaddam, Zahra Solving the Multi-objective of Aircraft Landing Scheduling Problem in Multi-Band Mode [Volume 21, Issue 1, 2019, Pages 19-34]
  • Farbeh, Hamed Improving Reliability of Processing Board of Cube Satellites by Modifying the Memory Structure [Volume 22, Issue 2, 2020, Pages 66-79]
  • Farhadi, Ali Prioritizing the Factors Affecting on Success Implementation of Maintenance Program Using Multi-criteria Decision-Making Techniques [Volume 21, Issue 2, 2019, Pages 1-16]
  • Farhadi Azar, Roozbeh Application of Turbulence Model in Investigation of Film Cooling Problem over a Flat Plate [Volume 13, Issue 1, 2011, Pages 53-62]
  • Farmani, Mohammad Numerical study of the effect of rectangular finlets on the turbulent boundary layer trailing edge noise of a flat edge [Volume 23, Issue 2, 2021, Pages 136-153]
  • Farrokhabadi, Amin Determination of static strength and fracture of aged aircraft structure using non-destructive quasi-static indentation test [Volume 23, Issue 1, 2021, Pages 33-43]
  • Farrokhfal, Hamid Airworthiness Classification of Unmanned Aircraft Systems Based on Risk Assessment of Operational Scenario [Volume 18, Issue 1, 2016, Pages 93-103]
  • Farsi, Mohammad Ali Reliability analysis of flutter threshold for an isotropic panel with different boundary conditions [Volume 20, Issue 2, 2018, Pages 67-74]
  • Farsi, Mohammad Ali Mission Analysis of Launch Abort System of a Manned Spacecraft via Trajectory Simulation and Aerodynamic Numerical Modelling [Volume 23, Issue 1, 2021, Pages 145-159]
  • Fartash, Amir hosein The investigation of change in thermal conductivity of porous coatings during the aging process [Volume 23, Issue 1, 2021, Pages 97-108]
  • Fazeli, Sadegh Numerical Simulation and Survey of Heat Transfer of Flow Mixing in a Lobed Mixer of a Turbofan Engine [Volume 23, Issue 1, 2021, Pages 160-174]
  • Fazli, Mahdi Experimental and numerical study of the effect of temperature on the stability shape and curvature of bi-stable hybrid asymmetric plates [Volume 21, Issue 1, 2019, Pages 11-18]
  • Fooladi, Mojtaba بررسی تجربی اثرات یخ‌زدگی روی پارامترهای آیرودینامیکی ایرفویل NACA 23012 [Volume 15, Issue 2, 2013, Pages 37-50]
  • Forouzan, Mohammadreza Life Estimation of a Helicopter Main Rotor Shaft Based on Standard FAA Spectrum [Volume 13, Issue 2, 2011, Pages 49-58]

G

  • Ghaderi, Farid Flightsafety Criteria to assess the safety performance of cockpit crew [Volume 25, Issue 2, 2023, Pages 142-154]
  • Ghadimi, Majid Three-Point Bending Test and Experimental and Numerical Modal Testing of Sandwich Plates with Grid Stiffened Core [Volume 23, Issue 1, 2021, Pages 125-144]
  • Ghadiri, Behzad Boundary Integral Equations for Time Domain Solution and Reduced Order Modeling of Thin Wings Unsteady Aerodynamics [Volume 13, Issue 1, 2011, Pages 39-51]
  • Ghaemmaghami, Shahrokh A Model for Detecting Targets and Classifying Pulses of 6-Antenna Radar Systems with Neural Networks Optimized by Genetic Algorithm [Volume 24, Issue 2, 2022, Pages 78-93]
  • Ghaffari, Hamid Fabrication and Testing of Composite Flange Using Experimental and Numerical Methods [Volume 25, Issue 2, 2023, Pages 34-47]
  • Ghafoori, Davoud شناسایی و تحلیل اثر مهارت های مدیریتی بر ارتقاء بهره وری:مطالعه موردی صنایع پشتیبانی و نوسازی هلیکوپتری ایران (پنها) [Volume 15, Issue 1, 2013, Pages 1-12]
  • Ghamarizadeh, Mojtaba Strategies for improving the surveillance and identification of drones in future battles [Volume 25, Issue 1, 2023, Pages 132-143]
  • Ghamarizadeh, Mojtaba Experimental and numerical investigation of energy absorption of corrugated thin-walled tubes with lateral holes under axial impact [(Articles in Press)]
  • Ghanbari, Alireza Online path planning for missile in dynamic environment using a heuristic algorithm [Volume 25, Issue 2, 2023, Pages 114-128]
  • Gharehbaghi, Hussain Numerical and Experimental Investigation of the variables influencing the thermal relaxation welded aluminum sheet [Volume 24, Issue 2, 2022, Pages 1-10]
  • Ghasemi, Ahmadreza Analytical and Experimental Studies of Cyclic Thermal Shock Effects on Nonlinear Behavior of Composite Laminates [Volume 14, Issue 2, 2012, Pages 1-16]
  • Ghasemi, Mahsa Modeling and Sliding Mode Control of a Roll-Pitch Seeker [Volume 25, Issue 1, 2023, Pages 76-90]
  • Ghasemi Poursabet, Hamid Identifying the Challenges of Innovation and Providing Solutions in Aircraft Industry by the Comparative Study of South Korea [Volume 17, Issue 2, 2015, Pages 10-22]
  • Ghasemloy, Sajjad Numerical calculation of the noise generated by air flow on different geometries [Volume 19, Issue 1, 2017, Pages 62-73]
  • Ghashochi-Bargh, Hadi Experimental and numerical study of the effect of temperature on the stability shape and curvature of bi-stable hybrid asymmetric plates [Volume 21, Issue 1, 2019, Pages 11-18]
  • Ghassabi, Masood Sound transmission loss analysis of graphene platelets reinforced plate based on three-dimensional elasticity theory [Volume 22, Issue 2, 2020, Pages 258-268]
  • Ghermezi, Masoud A New Approach in Predicting the Extent of Thin Plates Formation [Volume 13, Issue 1, 2011, Pages 76-85]
  • Ghermezi, Masoud ارائه مدل سنجش ارزیابی عملکردتعمیرات ونگهداری هواپیما با تلفیق مدل BSC و EFQM بر اساس روش فرآیند تحلیل شبکه ای فازی (FANP) ( مطالعه موردی : هواپیمایی جمهوری اسلامی ایران"هما") [Volume 15, Issue 1, 2013, Pages 23-40]
  • GHeysari, Mohsen The study of the degree of matching of pilot training provided by the University of Science and Technology, Shahid SATTARI with military and non - military systems on the different universities of the world [Volume 22, Issue 2, 2020, Pages 211-226]
  • Ghezelbash, Ehsan Low-order Linear Estimation of a Commercial Quadrotor using Flight [Volume 20, Issue 1, 2018, Pages 25-35]
  • Gholami, Mahmoud Experimental investigation of residual strength of aged aircrat structures [Volume 19, Issue 2, 2017, Pages 66-76]
  • Gholami, Reza Analytical Model-based Fault Detection in Air-launched Systems Using Statistical Markov Models [Volume 19, Issue 2, 2017, Pages 29-43]
  • Gholamnezhad, Pezhman UAV optimal routing based on reference vector guided evolutionary algorithm [Volume 23, Issue 1, 2021, Pages 44-55]
  • Ghorbani, Ali Numerical investigation of the AUSM-family in viscous and inviscid axisymmetric flow Field [Volume 25, Issue 1, 2023, Pages 1-15]

H

  • Habibi, Mohammad Hossein Investigation of the porosity influence on the free vibration behavior of functionally graded sandwich structures [Volume 24, Issue 2, 2022, Pages 52-66]
  • Habibpour, Ali Evaluation of acoustic propagation characteristics in fatigue crack nucleation and growth for structural monitoring of aircraft propeller [Volume 25, Issue 1, 2023, Pages 67-75]
  • Haddadpour, Hassan Boundary Integral Equations for Time Domain Solution and Reduced Order Modeling of Thin Wings Unsteady Aerodynamics [Volume 13, Issue 1, 2011, Pages 39-51]
  • Haddadpour, Hassan The Shimmy Vibration Analysis of Aircraft Landing Gear [Volume 13, Issue 2, 2011, Pages 59-69]
  • Hadian, Mahdi Identifying the Challenges of Innovation and Providing Solutions in Aircraft Industry by the Comparative Study of South Korea [Volume 17, Issue 2, 2015, Pages 10-22]
  • Haghighi, Hassan Multi-UAV persistent surveillance with basic patrolling pattern in minimum revisit time [Volume 20, Issue 1, 2018, Pages 1-12]
  • Hakimi, Meysam Experimental study of two-dimensional and axisymmetric pneumatic contact grippers for limp and porous materials [Volume 23, Issue 2, 2021, Pages 124-135]
  • Hamzezade, Morteza The effect of nozzle outlet diameter of a single-spool, mixed-flow turbofan engine on its performance [Volume 25, Issue 2, 2023, Pages 68-84]
  • Harimi, Soroush Experimental Investigation of DBD Plasma Actuator Effect on Pressure Distribution Just above the Surface [Volume 22, Issue 2, 2020, Pages 122-132]
  • Hassanzadeh, Ismaail Re-engineering of a Helicopter Structural Components Using Laminated Composite Materials Based on Crashworthiness Concepts [Volume 12, Issue 2, 2010, Pages 33-43]
  • Hemmatnejad, Fardin Enhancing corrosion resistance of helicopter skid shoes by HVOF method [(Articles in Press)]
  • Hesamipour, Hojat Design of Constrained Predictive Controller by Considering Communication Delay for Quadrotor and Optimal Adjustment of Controller Parameters [Volume 22, Issue 2, 2020, Pages 133-145]
  • Hesamipour, Hojat Reducing the Fluctuations of the Pitch Angle of a Dual-Spin Projectile Using State Machine and Particle Swarm Optimization Algorithm [(Articles in Press)]
  • Heshmatirad, Mahdi تحلیل عددی نفوذ بمب‌های سنگرشکن با انرژی جنبشی غیر‌هسته‌ای (GBU) در سازه‌های زیرزمینی [Volume 17, Issue 2, 2015, Pages 23-43]
  • Heydari, Ali Investigation of Unsteady Parameters Effects on Aerodynamic Coefficients of Pitching Airfoil Using Coarse Grid CFD [Volume 14, Issue 2, 2012, Pages 49-66]
  • Heydari, jafar Flightsafety Criteria to assess the safety performance of cockpit crew [Volume 25, Issue 2, 2023, Pages 142-154]
  • Heydari-Meybodi, Mahdi High-velocity impact on functionally graded materials: A numerical study [Volume 24, Issue 1, 2022, Pages 1-15]
  • Hojaji, Mohammad Experimental study of two-dimensional and axisymmetric pneumatic contact grippers for limp and porous materials [Volume 23, Issue 2, 2021, Pages 124-135]
  • Hojaji, Mohammad Experimental investigation of the effects of secondary flow injection on the output flow of the convergent-divergent nozzle at different beveled angles [Volume 24, Issue 1, 2022, Pages 45-56]
  • Hoseini Sianaki, Ahmad Effect of small scale on nonlinear vibrations of viscoelastic circular microplate rested on nonlinear viscoelastic foundation [Volume 24, Issue 2, 2022, Pages 152-166]
  • Hoseinzadeh, Masoud Synthesis of epoxy substrate graphene oxide nanoparticles with the approach of reducing RCS and increasing the thermal resistance of UAVs [Volume 23, Issue 2, 2021, Pages 68-79]
  • Hosseini, Hiwa Numerical Analysis of the Flow around Two Airfoils in a Tandem Configuration Regarding Pressure Distribution [Volume 24, Issue 1, 2022, Pages 37-44]
  • Hosseini, Rouhollah Experimental and numerical investigation of energy absorption of corrugated thin-walled tubes with lateral holes under axial impact [(Articles in Press)]
  • Hosseini, Sayed Ali Experimental investigation of the effects of secondary flow injection on the output flow of the convergent-divergent nozzle at different beveled angles [Volume 24, Issue 1, 2022, Pages 45-56]
  • Hossein Khani, Hasan Semi-empirical electromechanical model for pulsed plasma thrusters using two different approaches and comparison with experimental results [Volume 23, Issue 2, 2021, Pages 116-123]
  • Husseinzadeh Kashan, Ali Analysis of Iran’s civil aviation accidents and serious ‎incidents from 1979 to 2021 using failure mode and ‎effects analysis and multi-attribute decision making ‎methods [Volume 25, Issue 1, 2023, Pages 154-180]

I

  • Ilami, Kiomars Improving Safety in the TABRIZ Airport via Precision Approach Based on Continues Descent [Volume 17, Issue 2, 2015, Pages 82-89]
  • Ilbeygi, Mahdi Experimental Investigation of The Flow Field Over a Non-Slender lambda Shaped Wing by Pressure Measurement [Volume 17, Issue 1, 2015, Pages 10-21]
  • Imanifar, Alireza The Design and Calculation of Hydraulic Networks of Cooled Turbine Blades of the Jet Engine Using Graph Theory [Volume 13, Issue 1, 2011, Pages 63-73]
  • Irani, Saeed The effect of design parameters on light aircraft flaps mechanism’s reliability [Volume 17, Issue 1, 2015, Pages 75-82]
  • Isvand, Hassan Numerical Modeling of the Plate Behavior with Rotational Degree of Freedom and the Study of the Aerodynamic Hysteresis Phenomenon [Volume 12, Issue 2, 2010, Pages 13-22]
  • Isvand, Hassan Classification of Advanced Training Jet Airplane by Using the Analytical Hierarchy Process (AHP) and Taxonomy Method [Volume 16, Issue 2, 2014, Pages 15-31]
  • Isvand, Hassan بررسی تجربی جریان ناپایا حول یک مدل استوانه بهمراه سه صفحه عمود برآن [Volume 19, Issue 1, 2017, Pages 35-49]
  • Isvandzibaei, Mohammad Reza Experimental study of tensile and impact mechanical properties in polymer-based hybrid nanocomposites by response surface methodology [Volume 24, Issue 2, 2022, Pages 137-151]
  • Isvandzibaei, Mohammad Reza Analysis variations of volume fraction continuous functionally graded plates on the vibration of reinforced cylindrical shell under axial Loads with asymmetric boundary conditions [Volume 25, Issue 2, 2023, Pages 129-141]
  • Izadi Ounji, Seyyed Aminollah Analytical Model-based Fault Detection in Air-launched Systems Using Statistical Markov Models [Volume 19, Issue 2, 2017, Pages 29-43]

J

  • JABBARI, Hossein Frequency analysis and investigation of flow arrangement on two infinite wings with simple and sinusoidal leading-edges [Volume 22, Issue 2, 2020, Pages 227-239]
  • JABBARI, Hossein Effect of Optimized Roughness Distribution Elements on the Behavior of Phase portrait Circuits in Critical Reynolds [Volume 23, Issue 2, 2021, Pages 55-67]
  • Jafari, Ali طراحی و شبیه سازی کنترل پیش بین مدل برای کنترل سوخت موتور توربوجت موشک [Volume 19, Issue 1, 2017, Pages 1-12]
  • Jafari, Hamid Reza Performance optimization of helicopter main rotor in maneuver using inverse simulation [Volume 24, Issue 2, 2022, Pages 37-51]
  • Jafari, Mohammadjavad Air Flow Control at a Boundary Layer Using a Surface Dielectric Barrier Discharge Actuator [Volume 12, Issue 1, 2010, Pages 59-67]
  • Jahangirian, Alireza Generation of Cartesian Hybrid Grids for Aerodynamic Computation of Viscous Flows [Volume 12, Issue 2, 2010, Pages 1-11]
  • Jahanshahi, Hadi طراحی کنترلر مرتبه‌بالا مقاوم تطبیقی برای سیستم آشوب نامعین [Volume 19, Issue 1, 2017, Pages 13-25]
  • Jalali, Abdelali Investigating the effective factors on the implementation of the announced policies of the aviation and air transport sector Based upon the law of the country's 6th five-year development plan [Volume 25, Issue 1, 2023, Pages 91-112]
  • Jalali Naeini, Seyyed Hamid Three-Dimensional Midcourse Guidance with Moving Waypoints [Volume 14, Issue 1, 2012, Pages 47-56]
  • Jalali Naini, Seyyed Hamid Miss distance Analysis of Proportional Navigation Using Normalized Equations with Radome Effect, Saturation, and Body Rate Feedback [Volume 14, Issue 1, 2012, Pages 1-11]
  • Jalali Naini, Seyyed Hamid تحلیل فاصله خطای بی بعد ناشی از سیستم کنترل ناکمینه فاز در حضور اثر رادوم و اهداف با مانور [Volume 15, Issue 1, 2013, Pages 42-54]
  • Jalali Naini, Seyyed Hamid تحلیل فاصله خطای ناشی از نویز در ناوبری تناسبی با بازخورد شتاب برای سیستم مرتبه‌دوم با استفاده از روش الحاقی بی بعد [Volume 15, Issue 2, 2013, Pages 59-73]
  • Jalali Naini, Seyyed Hamid Miss Distance Analysis of Proportional Navigation for High-Order Binomial Control Systems in Presence of Noise and Target Maneuvers [Volume 18, Issue 1, 2016, Pages 34-50]
  • Jamali, Sajjad Multidisciplinary and Multi-Objective Design Optimization of a Flying Projectile Using Evolutionary Algorithm (NSGA-II) [Volume 16, Issue 1, 2014, Pages 17-32]
  • Jannesari Ladani, Javad طراحی و پیاده سازی سیستم فرودخودکار برای هواپیمای بدون سرنشین بر اساس سیستم ناوبری تصویری زمین پایه [Volume 19, Issue 1, 2017, Pages 26-34]
  • Jashnani, Hamidreza Analytical Model-based Fault Detection in Air-launched Systems Using Statistical Markov Models [Volume 19, Issue 2, 2017, Pages 29-43]
  • Javadi, Masoud Free Vibration and Aeroelastic Stability Analysis of Truncated Conical Panels in Supersonic Flows [Volume 22, Issue 2, 2020, Pages 107-121]
  • Javadi Sigaroodi, MohammadRasoul The investigation of change in thermal conductivity of porous coatings during the aging process [Volume 23, Issue 1, 2021, Pages 97-108]
  • Javareshkian, Mohammad Hassan مقایسه عملکرد طرح بالک کانارد، طرح دماغه مفصلی و طرح دماغه انعطاف‌پذیر در هدایت موشک مافوق صوت [Volume 15, Issue 1, 2013, Pages 84-96]
  • Javarshkian, Mohammadhassan Soft Recovery of a Supersonic Rocket using Un-Stablizing Technique [Volume 13, Issue 2, 2011, Pages 17-33]
  • Javidrad, Farhad Re-engineering of a Helicopter Structural Components Using Laminated Composite Materials Based on Crashworthiness Concepts [Volume 12, Issue 2, 2010, Pages 33-43]
  • Javidrad, Farhad Stiffness Optimization of Laminates based on a modified Parallel Simulated Annealing method [Volume 13, Issue 1, 2011, Pages 87-97]
  • Javidrad, Farhad Development of a Procedure for Re-engineering of the Central Wing Component of a Commercial Aircraft [Volume 18, Issue 2, 2016, Pages 40-53]
  • Joukar, Ali شناسایی و تحلیل اثر مهارت های مدیریتی بر ارتقاء بهره وری:مطالعه موردی صنایع پشتیبانی و نوسازی هلیکوپتری ایران (پنها) [Volume 15, Issue 1, 2013, Pages 1-12]

K

  • Kafimoghadam, Mostafa Online path planning for missile in dynamic environment using a heuristic algorithm [Volume 25, Issue 2, 2023, Pages 114-128]
  • Kalateh, Mohsen Strength analysis of aluminum matting plates welded by TIG welding process for airfield repair [Volume 20, Issue 2, 2018, Pages 16-26]
  • Karimi, Hossein بررسی تاثیر عوامل سازمانی بر عملکرد خلبانان مسافری با توجه به نقش تعدیلگر عوامل محیطی [Volume 18, Issue 2, 2016, Pages 69-84]
  • Karimi, Jalal Development of a Mushy State Simulated Annealing Algorithm for the Design of an Optimal Path Regulator Autopilot System [Volume 13, Issue 1, 2011, Pages 23-37]
  • Karimi, Jalal Parametric Optimization of Augmented Proportional Navigation Law Considering Performance and Maneuvering Capabilities [Volume 17, Issue 1, 2015, Pages 65-74]
  • Karimi, Jalal Multi-UAV persistent surveillance with basic patrolling pattern in minimum revisit time [Volume 20, Issue 1, 2018, Pages 1-12]
  • Karimi, Jalal Multi-Objective Optimization of Conventional Airplane Vertical Tail and Rudder [Volume 21, Issue 1, 2019, Pages 35-43]
  • Karimi, Jalal Trajectory Tracking Control of Quadrotor Using State Space Feedback by Optimal Gain Tuning [Volume 22, Issue 2, 2020, Pages 146-156]
  • Karimi, Jalal Optimal Control of UAV Fuel Consumption during Circular Loitering Flight [Volume 23, Issue 2, 2021, Pages 1-12]
  • Karimi, Mehrdad Experimental analysis of strength of coated nickel base superalloy Rene-80 [Volume 22, Issue 2, 2020, Pages 56-65]
  • Karimi, Nima Mission Analysis of Launch Abort System of a Manned Spacecraft via Trajectory Simulation and Aerodynamic Numerical Modelling [Volume 23, Issue 1, 2021, Pages 145-159]
  • KARIMI, JAVAD Requirements for equipping Tau anti-tank short-range missile with inertial guidance and navigation system [Volume 23, Issue 2, 2021, Pages 92-99]
  • Karimian Aliabadi, Saeed Experimental Analysis of a Flapping Aeroelastic Wing and Derivation of Genaralized Curves [Volume 14, Issue 1, 2012, Pages 13-25]
  • Karimi Kelayeh, Ruhollah Evaluation of aerodynamic performance of the geometrical twist by variation the Reynolds number in a flying wing [Volume 22, Issue 1, 2020, Pages 30-45]
  • Kazemi Nasrabadi, Mohammad Simulation of Milling Process in Roughening of Compressor Blade in Air Engine by Use of Finite Element Analysis [Volume 12, Issue 1, 2010, Pages 47-57]
  • Kazemi Nasrabadi, Mohammad The effect of rake angle and cutting speed on residual stress in broaching process of Ti6Al4V for air engines [Volume 17, Issue 2, 2015, Pages 73-81]
  • Kazemi Nasrabadi, Mohammad Reduction of wing-related incidents and aircraft fuselage by replacing riveting process with friction stir spot welding process [Volume 20, Issue 2, 2018, Pages 27-38]
  • Keshish, Larisa Modeling Jamming against Cruise Missile Considering Flat Earth Effect and jammer altitude in Electronic Warfare [Volume 24, Issue 1, 2022, Pages 27-36]
  • Keshvari, Rasoul Numerical Modeling of the Plate Behavior with Rotational Degree of Freedom and the Study of the Aerodynamic Hysteresis Phenomenon [Volume 12, Issue 2, 2010, Pages 13-22]
  • Khahanvar, Ahmad Experimental and Numerical Investigation of Vortex Generator effects on Flow Pattern and Aerodynamic Coefficients of an Airplane Wing Model [Volume 13, Issue 2, 2011, Pages 1-16]
  • Khajehfard, Afshin Investigation, Simulation & Analysis of Downburst-Related Aircraft Accidents Using FDR Data [Volume 12, Issue 1, 2010, Pages 33-46]
  • Khaki, Reza Investigation of a Method for Aerodynamic and Inertial Loading on Aircraft Finite Element Model Using Genetic Algorithm and Mapping [Volume 16, Issue 1, 2014, Pages 65-74]
  • Khaki, Reza Adaptive Fuzzy Slide Mode Control Design with Asymptotic Sliding Surface for MEMS Vibrational Gyroscope System in the Presence of Uncertainty [Volume 20, Issue 2, 2018, Pages 39-55]
  • Khalafi, Vahid Reliability analysis of flutter threshold for an isotropic panel with different boundary conditions [Volume 20, Issue 2, 2018, Pages 67-74]
  • Khalafi, Vahid Free Vibration and Aeroelastic Stability Analysis of Truncated Conical Panels in Supersonic Flows [Volume 22, Issue 2, 2020, Pages 107-121]
  • Khalesi, Mohammad Hossein Dynamic Modeling of Rotor Flapping Dynamics of an Unmanned Helicopter and Investigation of Applicability of System Identification and Control using Approximate Model [Volume 19, Issue 2, 2017, Pages 1-11]
  • Khalghani, Abbas Soft Recovery of a Supersonic Rocket using Un-Stablizing Technique [Volume 13, Issue 2, 2011, Pages 17-33]
  • Khalghani, Abbas مقایسه عملکرد طرح بالک کانارد، طرح دماغه مفصلی و طرح دماغه انعطاف‌پذیر در هدایت موشک مافوق صوت [Volume 15, Issue 1, 2013, Pages 84-96]
  • Khalilpour, Jafar Stabilization of the F-8 Fighter Aircraft Using Model-Based Predictive Control [Volume 20, Issue 2, 2018, Pages 1-15]
  • Khamseh, Abbas Identifying and prioritizing key factors affecting the management of complex megaprojects in the aircraft design & manufacturing industry [Volume 25, Issue 1, 2023, Pages 113-131]
  • Khanloh, Heshmatollah اثر کنترل‌کنندگی فرکانس نیروی تحریک بر رفتار دینامیکی آشوبناک سیستم‌های دوار [Volume 15, Issue 2, 2013, Pages 51-58]
  • Khanloh, Heshmatollah Vibrational Response of the Pilot Biodynamic Models in Various Flight Maneuver [Volume 21, Issue 1, 2019, Pages 44-56]
  • Khanloh, Heshmatollah Identify Effective Factors in the Occurrence of Helicopters and Provide Solutions to Reduce Disasters [Volume 23, Issue 1, 2021, Pages 1-17]
  • Khatoonabadi, Elahe Improving a Satellite Attitude Control Using Fractional-Order Controller in the Presence of Environmental Disturbances [Volume 24, Issue 2, 2022, Pages 67-77]
  • Khazaee, Mostafa Vibration fault detection of coaxial helicopter blade using wavelet transform and experimental learning based on neural network [(Articles in Press)]
  • Kheirandish, Mehdi Assessing the Readiness Degree of Organizations Working in Aerospace Industry for Transformation to Learning Organization [Volume 12, Issue 2, 2010, Pages 65-73]
  • Kheirandish, Mehdi Identifying the effective factors in aviation accident and providing an appropriate model [Volume 13, Issue 2, 2011, Pages 71-78]
  • Khoshcheshm, Seyyed Ali Prioritizing the Factors Affecting on Success Implementation of Maintenance Program Using Multi-criteria Decision-Making Techniques [Volume 21, Issue 2, 2019, Pages 1-16]
  • Khoshkhoo, Roohollah Experimental Investigation of DBD Plasma Actuator Effect on Pressure Distribution Just above the Surface [Volume 22, Issue 2, 2020, Pages 122-132]
  • Khoshkhoo, Roohollah Numerical Simulation and Survey of Heat Transfer of Flow Mixing in a Lobed Mixer of a Turbofan Engine [Volume 23, Issue 1, 2021, Pages 160-174]
  • Khoshkhoo, Roohollah Investigation of the Effect of DBD Plasma Actuator Location on Flow Control on Cascade of Axial Compressor [Volume 24, Issue 1, 2022, Pages 57-69]
  • Khoshkhoo, Roohollah Experimental Investigation of the Effect of Different Arrangements of the Corona Plasma Actuator on Thrust produced on the Flat Plate [Volume 25, Issue 1, 2023, Pages 144-153]
  • Khosravi Samani, Mahdi Robust compensation of radome error using μ-synthesis technique [Volume 20, Issue 2, 2018, Pages 56-66]
  • Kiani, Amir Semi-empirical electromechanical model for pulsed plasma thrusters using two different approaches and comparison with experimental results [Volume 23, Issue 2, 2021, Pages 116-123]
  • Kiani, Maryam Experimental Calibration and Error Identification of Micro Electro-Mechanical Systems [Volume 17, Issue 1, 2015, Pages 1-9]

L

  • Laali, Esmaiel بهینه‌سازی طراحی چند موضوعی یک پرتابه، حامل پرنده بدون سرنشین پرتاب‌شونده از توپ [Volume 15, Issue 2, 2013, Pages 1-13]
  • Liaghat, Golamhosein Energy absorption investigation of cylindrical tube filled by functionally graded foam in quasi static test [Volume 21, Issue 1, 2019, Pages 1-10]
  • Livani, Mostafa بهینه‌سازی پانل ساندویچی هسته منشوری به‌وسیله الگوریتم تکامل تفاضلی مقید بهبودیافته [Volume 18, Issue 2, 2016, Pages 54-68]
  • Livani, Mostafa Ring rolling work rolls life estimation by means of Manson-Halford-Haibach method [Volume 22, Issue 2, 2020, Pages 23-40]
  • Livani, Mostafa Experimental analysis of strength of coated nickel base superalloy Rene-80 [Volume 22, Issue 2, 2020, Pages 56-65]
  • Livani, Mostafa Investigation of the porosity influence on the free vibration behavior of functionally graded sandwich structures [Volume 24, Issue 2, 2022, Pages 52-66]
  • Livani, Mostafa Enhancing corrosion resistance of helicopter skid shoes by HVOF method [(Articles in Press)]
  • Lotfi Jalal Abadi, Mostafa شناسایی مولفه های موثر برای استقرار نگهداری مبتنی بر قابلیت اطمینان در یک سازمان هوایی [Volume 18, Issue 2, 2016, Pages 26-39]

M

  • Madani, Afshin Aerodynamic Investigation of Crow Flap Control System in a Flying Wing UAV Aircraft [(Articles in Press)]
  • Madani, Mohammad Hossein Navigation Accuracy Improvement Using a New Integrated Algorithm of TOA/TDOA in Ground-based Loran Systems [Volume 16, Issue 2, 2014, Pages 33-46]
  • Mahdavi, Mojdeh Improving Reliability of Processing Board of Cube Satellites by Modifying the Memory Structure [Volume 22, Issue 2, 2020, Pages 66-79]
  • Mahdavi, Mojdeh Modeling Jamming against Cruise Missile Considering Flat Earth Effect and jammer altitude in Electronic Warfare [Volume 24, Issue 1, 2022, Pages 27-36]
  • Mahdavi Moghadam, Hossein A 3-D study of primary holes geometry effectiveness on film cooling efficiency and thrust of combustion chamber [Volume 13, Issue 2, 2011, Pages 35-47]
  • Mahdian, Asghar Design, Analysis and Manufacturing of One-Manned Coaxial Electric Helicopter [Volume 23, Issue 2, 2021, Pages 13-28]
  • Mahjoub Eshratabadi, Hassan شناسایی و تحلیل اثر مهارت های مدیریتی بر ارتقاء بهره وری:مطالعه موردی صنایع پشتیبانی و نوسازی هلیکوپتری ایران (پنها) [Volume 15, Issue 1, 2013, Pages 1-12]
  • Mahmoodzadeh Entezari, Seyed Moein Mission Analysis of Launch Abort System of a Manned Spacecraft via Trajectory Simulation and Aerodynamic Numerical Modelling [Volume 23, Issue 1, 2021, Pages 145-159]
  • Mahmoudi, Meysam study free convection heat transfer nanofluid square cavity with a circular hot barrier [(Articles in Press)]
  • Mahmoudi, Meysam Numerical analysis of the thermal conduction of a triangular solid region on the flow and free convection heat transfer in a two-dimensional cavity containing nanofluid [Volume 25, Issue 2, 2023, Pages 1-11]
  • Mahmoudi, Mohammadreza Experimental and Numerical Investigation of Vortex Generator effects on Flow Pattern and Aerodynamic Coefficients of an Airplane Wing Model [Volume 13, Issue 2, 2011, Pages 1-16]
  • Malaek, Seyyed Mohammadbagher Investigation, Simulation & Analysis of Downburst-Related Aircraft Accidents Using FDR Data [Volume 12, Issue 1, 2010, Pages 33-46]
  • Malekfar, Rasol Modeling of Multi-layer Microwave Absorber Structures for radar cross section [Volume 18, Issue 2, 2016, Pages 16-25]
  • Malekijavan, Alireza Position improvement of GPS/INS using NAR neural network and robust Kalman filter during GPS outage [Volume 21, Issue 2, 2019, Pages 46-56]
  • Malekijavan, Alireza Synthesis of epoxy substrate graphene oxide nanoparticles with the approach of reducing RCS and increasing the thermal resistance of UAVs [Volume 23, Issue 2, 2021, Pages 68-79]
  • Malekipour, Shahed Experimental investigation of Mach 6 optimal hypersonic nozzle performance in shock tunnel [Volume 25, Issue 2, 2023, Pages 21-33]
  • Malek Jafarian, Majid Investigation of Unsteady Parameters Effects on Aerodynamic Coefficients of Pitching Airfoil Using Coarse Grid CFD [Volume 14, Issue 2, 2012, Pages 49-66]
  • Malekshahi, Gelareh Investigation, Simulation and Comparison of the Effect of Electrostatic Discharge (ESD) in Military Aircraft with Metal body, Composite and Combined mode [Volume 25, Issue 1, 2023, Pages 55-66]
  • Malekzadeh Fard, Keramat بهینه‌سازی پانل ساندویچی هسته منشوری به‌وسیله الگوریتم تکامل تفاضلی مقید بهبودیافته [Volume 18, Issue 2, 2016, Pages 54-68]
  • Malekzadeh Fard, Keramat Flatter analysis of cylindrical sandwich panel under follower force using generalized differential quadrature method [Volume 20, Issue 1, 2018, Pages 49-61]
  • Malekzadeh Fard, Keramat Nonlinear biodynamic analysis of pilot suspension system under three-axis excitation loads [Volume 21, Issue 2, 2019, Pages 17-28]
  • Malekzadeh Fard, Keramat Numerical Study of Microblowing System Effect on Reducing the Drag Force of a SC(2)-0710 Supercritical Airfoil [Volume 22, Issue 1, 2020, Pages 67-83]
  • Malekzadeh Fard, Keramat Vibration analyses of trapezoidal sandwich panel under supersonic flow [Volume 22, Issue 2, 2020, Pages 1-22]
  • Malekzadeh Fard, Keramat Optimum design of MR oleopneumatic shock absorber for airplane landing gear [Volume 22, Issue 2, 2020, Pages 171-196]
  • Malekzadeh Fard, Keramat Evaluation of plastic and elastic properties of magnesium plate in different rolling directions using correlation of digital images [Volume 23, Issue 1, 2021, Pages 56-72]
  • Malekzadeh Fard, Keramat Control design of an aerial refueling system using a combination of machine vision and GPS taking into account the vortex flow effects of the refueling aircraft [Volume 24, Issue 2, 2022, Pages 167-185]
  • Mani, Mahmood Experimental Investigation of DBD Plasma Actuator Effect on Pressure Distribution Just above the Surface [Volume 22, Issue 2, 2020, Pages 122-132]
  • Manouchehr, Manteghi Identifying and prioritizing key factors affecting the management of complex megaprojects in the aircraft design & manufacturing industry [Volume 25, Issue 1, 2023, Pages 113-131]
  • Maracy, Abdol Ali Investigation of 2-D Hot Ring Rolling Simulation and Effects of Different Parameters on Forming Process of Jet’s Spool [Volume 18, Issue 1, 2016, Pages 75-92]
  • Marvinam, Mohammadreza Designing a flight database for increasing aviation safety [Volume 14, Issue 2, 2012, Pages 77-87]
  • Mashreghian, Elham Cooperative patrolling Scenario design providing the ability to focus on priority areas by a group of UAVs [Volume 22, Issue 2, 2020, Pages 240-257]
  • Mazaheri, Karim Experimental Analysis of a Flapping Aeroelastic Wing and Derivation of Genaralized Curves [Volume 14, Issue 1, 2012, Pages 13-25]
  • Mazaheri, Karim بهبود اندرکنش موج ضربه ای و لایه مرزی در جریان گذر صوت با استفاده از برجستگی کنترل موج ضربه ای [Volume 15, Issue 1, 2013, Pages 69-82]
  • Mazloum, Jalil Design and Simulation of a Linear Adaptive System to Eliminate the Effect of Single-frequency Jammer in Warplane Data Link [Volume 18, Issue 1, 2016, Pages 51-59]
  • Mazloum, Jalil UAV optimal routing based on reference vector guided evolutionary algorithm [Volume 23, Issue 1, 2021, Pages 44-55]
  • Mehrdoust, Alireza اثر کنترل‌کنندگی فرکانس نیروی تحریک بر رفتار دینامیکی آشوبناک سیستم‌های دوار [Volume 15, Issue 2, 2013, Pages 51-58]
  • Mehrdoust, Alireza Flight Management System design for Emergency Conditions [Volume 17, Issue 1, 2015, Pages 53-64]
  • Meskini, Mohammad Investigation of the porosity influence on the free vibration behavior of functionally graded sandwich structures [Volume 24, Issue 2, 2022, Pages 52-66]
  • Mirbolouki, Mahnaz Evaluation the efficiency of Iran's airports by applying the two-stage Network of Data Envelopment Analysis method [Volume 19, Issue 2, 2017, Pages 12-28]
  • Miri, Mohammad Robust Guidance Law Optimization for a Smart Projectile [Volume 21, Issue 2, 2019, Pages 36-45]
  • Mirjalili, Reza Three-Dimensional Midcourse Guidance with Moving Waypoints [Volume 14, Issue 1, 2012, Pages 47-56]
  • Mirsajedi, Seyyed Mehdi Improvement in a moving mesh algorithm and development of a central difference algorithm for the solution of unsteady flows [Volume 14, Issue 1, 2012, Pages 73-89]
  • Mirzaee, Masoud Experimental Investigation of Pressure Distribution and Aerodynamic Coefficients in a Blade Cascade of an Airplane Engine Compressor [Volume 12, Issue 1, 2010, Pages 1-9]
  • Mirzaei, Jaber Experimental investigation of glass/hemp hybrid composite plates under low-velocity impact loading [Volume 24, Issue 2, 2022, Pages 125-136]
  • Mirzaei, Mostafa Effect of Impactor Energy and Layers Thickness on Fiber Metal Laminates in Low Velocity Impact [Volume 16, Issue 2, 2014, Pages 73-82]
  • Mirzaei, Saeed Numerical Simulation of several Structures of Plasma Actuators and Their Performance Assessment over NACA 0012 and NACA 0015 Airfoils [Volume 16, Issue 1, 2014, Pages 75-94]
  • Mirzaie, Masoud بررسی تجربی اثرات یخ‌زدگی روی پارامترهای آیرودینامیکی ایرفویل NACA 23012 [Volume 15, Issue 2, 2013, Pages 37-50]
  • Moafi Madani, Seyyed Mohammad Javad Autopilot Design using Static H∞ Loop shaping controller [Volume 13, Issue 2, 2011, Pages 79-94]
  • Moayeri, Mehdi Effect of small scale on nonlinear vibrations of viscoelastic circular microplate rested on nonlinear viscoelastic foundation [Volume 24, Issue 2, 2022, Pages 152-166]
  • Moghaddam Zarandi, Zahra Solving the Multi-objective of Aircraft Landing Scheduling Problem in Multi-Band Mode [Volume 21, Issue 1, 2019, Pages 19-34]
  • Mohammad Hoseini, Saeed Design and Experimental Test of Alignment Algorithm based on Inertial Measurement Unit Outputs [Volume 20, Issue 1, 2018, Pages 13-24]
  • Mohammad Hossein, Hamid Dynamic Modelling and Simulation of the Fuel Cell System for Supplying a Portion of Electric Energy of C-130 Hercules [Volume 16, Issue 1, 2014, Pages 1-16]
  • Mohammadi, Adnan Numerical investigation of the AUSM-family in viscous and inviscid axisymmetric flow Field [Volume 25, Issue 1, 2023, Pages 1-15]
  • Mohammadi Amin, Meysam Boundary Integral Equations for Time Domain Solution and Reduced Order Modeling of Thin Wings Unsteady Aerodynamics [Volume 13, Issue 1, 2011, Pages 39-51]
  • Mohammadi Amin, Meysam Experimental investigation of Mach 6 optimal hypersonic nozzle performance in shock tunnel [Volume 25, Issue 2, 2023, Pages 21-33]
  • Mohammadi-Amin, Meysam Mission Analysis of Launch Abort System of a Manned Spacecraft via Trajectory Simulation and Aerodynamic Numerical Modelling [Volume 23, Issue 1, 2021, Pages 145-159]
  • Mohammadkarimi, Hamed Model-Aided Inertial Navigation Applied to Wind Estimation for a Fixed Wing UAV [(Articles in Press)]
  • Mohammadkarimi, Hamed Modeling and Sliding Mode Control of a Roll-Pitch Seeker [Volume 25, Issue 1, 2023, Pages 76-90]
  • Mohammadzaman, Iman Autopilot Design using Static H∞ Loop shaping controller [Volume 13, Issue 2, 2011, Pages 79-94]
  • Mohammadzaman, Iman Robust compensation of radome error using μ-synthesis technique [Volume 20, Issue 2, 2018, Pages 56-66]
  • Moharampour, Ali Reducing the Fluctuations of the Pitch Angle of a Dual-Spin Projectile Using State Machine and Particle Swarm Optimization Algorithm [(Articles in Press)]
  • Mokhtari, S.Abolfazl A new flocking algorithm for UAVs using a distributed control approach [Volume 25, Issue 1, 2023, Pages 16-27]
  • Momenbelah, Samad Modeling of Multi-layer Microwave Absorber Structures for radar cross section [Volume 18, Issue 2, 2016, Pages 16-25]
  • Moosapour, Seyyed Hamzeh A Novel Robust Proportional Navigation Guidance Law for Surface-to-Air Missile Based on Extended Kalman Filter [Volume 16, Issue 1, 2014, Pages 33-48]
  • Moradi, Behnam Analytical Model of Sound Transmission Through Infinite Laminated Composite Double Walled Cylindrical Shells [Volume 12, Issue 1, 2010, Pages 67-78]
  • Moradi, Morteza Comparison of Particle Filter Pperformance with Extended and Hybrid Extended Kalman Filter in INS/GPS Data Fusion [Volume 22, Issue 2, 2020, Pages 41-55]
  • Moradi, rasool Development of Johnson Holmquist model to simulate the impact of airborne projectiles on concrete structures [(Articles in Press)]
  • Morourinam, Mohammadreza Identifying the effective factors in aviation accident and providing an appropriate model [Volume 13, Issue 2, 2011, Pages 71-78]
  • Morshedi, Hamid Determination of static strength and fracture of aged aircraft structure using non-destructive quasi-static indentation test [Volume 23, Issue 1, 2021, Pages 33-43]
  • Mortazavi, Mahdi Continuous Curvature Trajectory Planning Based on Dubins Path and Bézier Curve for UAVs [Volume 16, Issue 1, 2014, Pages 49-64]
  • Mostakhdemin Hoseini, Setare The effect of nozzle outlet diameter of a single-spool, mixed-flow turbofan engine on its performance [Volume 25, Issue 2, 2023, Pages 68-84]
  • Motakef Imani, Behnam Simulation of Milling Process in Roughening of Compressor Blade in Air Engine by Use of Finite Element Analysis [Volume 12, Issue 1, 2010, Pages 47-57]
  • Motakef Imani, Behnam Prediction of stability lobes in milling of aluminum alloy 7075 using time series analysis [Volume 14, Issue 1, 2012, Pages 57-72]
  • Motamedi, Ali Continuous Curvature Trajectory Planning Based on Dubins Path and Bézier Curve for UAVs [Volume 16, Issue 1, 2014, Pages 49-64]
  • Motarek, Omid Generation of Cartesian Hybrid Grids for Aerodynamic Computation of Viscous Flows [Volume 12, Issue 2, 2010, Pages 1-11]
  • Mousavi, Seyyedeh Neda شبیه سازی عملکرد سامانه پیشرفته کنترل و هدایت حرکت در سطح (A-SMGCS) مطالعه موردی: فرودگاه بین المللی مهرآباد [Volume 18, Issue 1, 2016, Pages 60-74]
  • Mousavi, Seyyed Javad Multidisciplinary and Multi-Objective Design Optimization of a Flying Projectile Using Evolutionary Algorithm (NSGA-II) [Volume 16, Issue 1, 2014, Pages 17-32]
  • Mousavian, Seyyed Aliakbar کنترل آرایش ربات‌های هوایی در مسیر معین مبتنی بر پردازش تصویر در شرایط نارسایی ارتباطی میان عضوی [Volume 15, Issue 1, 2013, Pages 55-68]
  • Movahedi, Alireza Experimental investigation of the effect of using sound absorbing walls in reducing wind tunnel background noise [Volume 25, Issue 2, 2023, Pages 101-113]
  • Movahed Nejad, Hadi Semi-empirical electromechanical model for pulsed plasma thrusters using two different approaches and comparison with experimental results [Volume 23, Issue 2, 2021, Pages 116-123]

N

  • Naddaf Oskouei, Alireza Experimental and numerical investigation of energy absorption of corrugated thin-walled tubes with lateral holes under axial impact [(Articles in Press)]
  • Naderi, Alireza Experimental Investigation of Grid Winglet Effects on Aerodynamic Characteristics of a Wing Model at Low Reynolds Number [Volume 16, Issue 2, 2014, Pages 1-14]
  • Naderi, Mehdi A New Approach in Predicting the Extent of Thin Plates Formation [Volume 13, Issue 1, 2011, Pages 76-85]
  • Nafehkeshanfard, Hamidreza Nonlinear biodynamic analysis of pilot suspension system under three-axis excitation loads [Volume 21, Issue 2, 2019, Pages 17-28]
  • Naghipour, Shahla Non [Volume 14, Issue 2, 2012, Pages 35-48]
  • Najafi, Amin Multiple actuator fault diagnosis based on parity space for quadrotor system [Volume 22, Issue 1, 2020, Pages 1-11]
  • Najafi, Amir Offering the model based on system dynamics for improvement of flight safety [Volume 17, Issue 2, 2015, Pages 44-56]
  • Najafi, Ehsan Investigation of synthetic jet actuator position in delaying separation of a supercritical airfoil [Volume 24, Issue 1, 2022, Pages 83-96]
  • Najafi, Majdeddin طراحی و پیاده سازی سیستم فرودخودکار برای هواپیمای بدون سرنشین بر اساس سیستم ناوبری تصویری زمین پایه [Volume 19, Issue 1, 2017, Pages 26-34]
  • Najafian, Arezou Numerical calculation of the noise generated by air flow on different geometries [Volume 19, Issue 1, 2017, Pages 62-73]
  • Najafizadeh Sari, Naeimeh طراحی کنترلر مرتبه‌بالا مقاوم تطبیقی برای سیستم آشوب نامعین [Volume 19, Issue 1, 2017, Pages 13-25]
  • Nakhaei, Ali Reza X-band radiating slotted waveguide antenna for use in guided missile proximity fuse [(Articles in Press)]
  • Nasiri Negarestan, Mahdi Vibration fault detection of coaxial helicopter blade using wavelet transform and experimental learning based on neural network [(Articles in Press)]
  • Nasirzadeh, Aziz Designing a flight database for increasing aviation safety [Volume 14, Issue 2, 2012, Pages 77-87]
  • Nasirzadeh, Elnaz A Model for Detecting Targets and Classifying Pulses of 6-Antenna Radar Systems with Neural Networks Optimized by Genetic Algorithm [Volume 24, Issue 2, 2022, Pages 78-93]
  • Nasrollahi, Saeed Comparison of Particle Filter Pperformance with Extended and Hybrid Extended Kalman Filter in INS/GPS Data Fusion [Volume 22, Issue 2, 2020, Pages 41-55]
  • Nasrollahi, Saeed Design of Constrained Predictive Controller by Considering Communication Delay for Quadrotor and Optimal Adjustment of Controller Parameters [Volume 22, Issue 2, 2020, Pages 133-145]
  • Nasrollahi, Saeed Reducing the Fluctuations of the Pitch Angle of a Dual-Spin Projectile Using State Machine and Particle Swarm Optimization Algorithm [(Articles in Press)]
  • Nasrollahzadeh, Mehdi بهینه‌سازی طراحی چند موضوعی یک پرتابه، حامل پرنده بدون سرنشین پرتاب‌شونده از توپ [Volume 15, Issue 2, 2013, Pages 1-13]
  • Nateghi, Alireza A Novel 115V, 400Hz reduced switch inverter for use in aircraft emergency power supply [Volume 25, Issue 2, 2023, Pages 85-100]
  • Naturizadeh, Mehdi Effects of MRD Concept on the Performance of a Supersonic Air Inlet [(Articles in Press)]
  • Nayebi, Alireza Investigation of Current Military Aircraft Accidents Investigation Model and Presenting a New Model, Considering the Newly Suggested Accidents Investigation Methods [Volume 17, Issue 1, 2015, Pages 35-52]
  • Nayebi, Alireza Numerical Study of Mass Flow and Septum Position Effects on Thrust Vectoring and Flow Structure of an ACHEON Nozzle [Volume 24, Issue 1, 2022, Pages 159-176]
  • Negahban.B, ali Ring rolling work rolls life estimation by means of Manson-Halford-Haibach method [Volume 22, Issue 2, 2020, Pages 23-40]
  • Negahban.B, ali Integrated Task Assignment and Path Planning with Moving Targets Based on an Innovative Linear Programming Approach and Dubins Curves [Volume 22, Issue 2, 2020, Pages 197-210]
  • Negahban.B, ali Development of Johnson Holmquist model to simulate the impact of airborne projectiles on concrete structures [(Articles in Press)]
  • Negahban Boron, Ali Multi-Objective Emergency Landing Trajectory Design Based on Motion Primitives [Volume 17, Issue 2, 2015, Pages 57-72]
  • Negahban Boron, Ali Investigation of 2-D Hot Ring Rolling Simulation and Effects of Different Parameters on Forming Process of Jet’s Spool [Volume 18, Issue 1, 2016, Pages 75-92]
  • Negahbanborun, Ali Energy absorption investigation of cylindrical tube filled by functionally graded foam in quasi static test [Volume 21, Issue 1, 2019, Pages 1-10]
  • Nejati, Ashkan بهبود اندرکنش موج ضربه ای و لایه مرزی در جریان گذر صوت با استفاده از برجستگی کنترل موج ضربه ای [Volume 15, Issue 1, 2013, Pages 69-82]
  • Nejati Jahromi, Mansour Design, Simulation, and Evaluation of a Secure Air Navigation Based on Multipath, Adaptive Loading and Wireless Ad Hoc Networks [Volume 12, Issue 2, 2010, Pages 23-32]
  • Neysi, Valid Performance Analysis and Optimization of Micro-turbine Combustion Chamber by Numerical Simulation [Volume 16, Issue 2, 2014, Pages 47-62]
  • Nikkhah, Amir Ali Optimal combination of inertial sensors for initial alignment of strapdown navigation system using genetic algorithm [Volume 17, Issue 1, 2015, Pages 22-34]
  • Nikkhoo, Amirfarhang Investigation of Thickness, Camber and Maximum Proximity Effect on Infinite Wavy Wing [Volume 23, Issue 1, 2021, Pages 73-85]
  • Niknezhad, Mahdi Numerical investigation of store separation from airplane wing, and study of the parameters, affecting the fall amount of store [Volume 19, Issue 2, 2017, Pages 44-54]
  • Nikusokhan, Mahdi Robust compensation of radome error using μ-synthesis technique [Volume 20, Issue 2, 2018, Pages 56-66]
  • Nikuyi, Mohammad Ring rolling work rolls life estimation by means of Manson-Halford-Haibach method [Volume 22, Issue 2, 2020, Pages 23-40]
  • Nobahari, Hadi a [Volume 13, Issue 1, 2011, Pages 1-22]
  • Nobahari, Hadi Model-Aided Inertial Navigation Applied to Wind Estimation for a Fixed Wing UAV [(Articles in Press)]
  • Nobahari, Hadi Modeling and Sliding Mode Control of a Roll-Pitch Seeker [Volume 25, Issue 1, 2023, Pages 76-90]
  • Nosrati Malekjahan, Amirhosein Analysis of Iran’s civil aviation accidents and serious ‎incidents from 1979 to 2021 using failure mode and ‎effects analysis and multi-attribute decision making ‎methods [Volume 25, Issue 1, 2023, Pages 154-180]
  • Nosrattolahi, Mehran Aerial Target Tracking using Visual sensor and Laser finder [Volume 21, Issue 2, 2019, Pages 57-72]
  • Nouri, Ali Analytical Model of Sound Transmission Through Infinite Laminated Composite Double Walled Cylindrical Shells [Volume 12, Issue 1, 2010, Pages 67-78]
  • Nouri, Ali Vibration and buckling analysis of longitudinally stiffened cylindrical shells under the axial static loading [Volume 21, Issue 1, 2019, Pages 57-69]
  • Nouri, Roohollah Stiffness Optimization of Laminates based on a modified Parallel Simulated Annealing method [Volume 13, Issue 1, 2011, Pages 87-97]
  • Nouri Niyaraki, Ebrahim Experimental study of tensile and impact mechanical properties in polymer-based hybrid nanocomposites by response surface methodology [Volume 24, Issue 2, 2022, Pages 137-151]
  • Nouri Niyaraki, Meysam Experimental study of tensile and impact mechanical properties in polymer-based hybrid nanocomposites by response surface methodology [Volume 24, Issue 2, 2022, Pages 137-151]
  • Nouri Niyaraki, Meysam Analysis variations of volume fraction continuous functionally graded plates on the vibration of reinforced cylindrical shell under axial Loads with asymmetric boundary conditions [Volume 25, Issue 2, 2023, Pages 129-141]

O

  • Oloumi, Mohsen Semi-empirical electromechanical model for pulsed plasma thrusters using two different approaches and comparison with experimental results [Volume 23, Issue 2, 2021, Pages 116-123]
  • Omidi Hemmat, Omid Optimal combination of inertial sensors for initial alignment of strapdown navigation system using genetic algorithm [Volume 17, Issue 1, 2015, Pages 22-34]
  • Omidi Hemmat, Omid Design and Experimental Test of Alignment Algorithm based on Inertial Measurement Unit Outputs [Volume 20, Issue 1, 2018, Pages 13-24]
  • Ostadi, Bakhtiar Analysis of Iran’s civil aviation accidents and serious ‎incidents from 1979 to 2021 using failure mode and ‎effects analysis and multi-attribute decision making ‎methods [Volume 25, Issue 1, 2023, Pages 154-180]

P

  • Parastari, Javad Improving Safety in the TABRIZ Airport via Precision Approach Based on Continues Descent [Volume 17, Issue 2, 2015, Pages 82-89]
  • Parastari, Javad شبیه سازی عملکرد سامانه پیشرفته کنترل و هدایت حرکت در سطح (A-SMGCS) مطالعه موردی: فرودگاه بین المللی مهرآباد [Volume 18, Issue 1, 2016, Pages 60-74]
  • Parhizkar, Hamid Numerical calculation of the noise generated by air flow on different geometries [Volume 19, Issue 1, 2017, Pages 62-73]
  • Parpanji, Seyyed Morteza Experimental investigation of air flow velocity distribution and its turbulences in an octagonal to square diffuser [Volume 14, Issue 2, 2012, Pages 67-76]
  • Parsa, Ali Low-order Linear Estimation of a Commercial Quadrotor using Flight [Volume 20, Issue 1, 2018, Pages 25-35]
  • Partovi, Mohammad Taghi Improve radar performance in cluttered environments by integrating pulse compression method and signal surface compensation algorithm [(Articles in Press)]
  • Pasandideh fard, Mahmoud Soft Recovery of a Supersonic Rocket using Un-Stablizing Technique [Volume 13, Issue 2, 2011, Pages 17-33]
  • Pasandideh Fard, Mahmoud Investigation of Unsteady Parameters Effects on Aerodynamic Coefficients of Pitching Airfoil Using Coarse Grid CFD [Volume 14, Issue 2, 2012, Pages 49-66]
  • Pasandideh Fard, Mahmoud مقایسه عملکرد طرح بالک کانارد، طرح دماغه مفصلی و طرح دماغه انعطاف‌پذیر در هدایت موشک مافوق صوت [Volume 15, Issue 1, 2013, Pages 84-96]
  • Pasandideh Fard, Mahmoud Numerical Simulation of several Structures of Plasma Actuators and Their Performance Assessment over NACA 0012 and NACA 0015 Airfoils [Volume 16, Issue 1, 2014, Pages 75-94]
  • Pazooki, Farshad Optimization and Design of General Aviation Aircrafts Wing Using Non-Dominated Sorting Genetic Algorithms II [Volume 23, Issue 2, 2021, Pages 100-115]
  • Pirali, Puya Three-Point Bending Test and Experimental and Numerical Modal Testing of Sandwich Plates with Grid Stiffened Core [Volume 23, Issue 1, 2021, Pages 125-144]
  • Poladrang, Youness Experimental Investigation of Applying the Novel Bean-Shaped Hole Geometry for the Film Cooling [Volume 25, Issue 1, 2023, Pages 40-54]
  • Pour, Masoud Prediction of stability lobes in milling of aluminum alloy 7075 using time series analysis [Volume 14, Issue 1, 2012, Pages 57-72]
  • Pouriyani, Jaber مطالعه موردی یخ‌زنی هواپیما در مسیرهای مختلف پروازی در ایران [Volume 15, Issue 2, 2013, Pages 15-24]
  • Pourmoayed, Alireza Flatter analysis of cylindrical sandwich panel under follower force using generalized differential quadrature method [Volume 20, Issue 1, 2018, Pages 49-61]
  • Pourmoayed, Alireza Nonlinear biodynamic analysis of pilot suspension system under three-axis excitation loads [Volume 21, Issue 2, 2019, Pages 17-28]
  • Pourmoayed, Alireza Numerical Study of Microblowing System Effect on Reducing the Drag Force of a SC(2)-0710 Supercritical Airfoil [Volume 22, Issue 1, 2020, Pages 67-83]
  • Pourmoayed, Alireza Vibration analyses of trapezoidal sandwich panel under supersonic flow [Volume 22, Issue 2, 2020, Pages 1-22]
  • Pourmoayed, Alireza Optimum design of MR oleopneumatic shock absorber for airplane landing gear [Volume 22, Issue 2, 2020, Pages 171-196]
  • Pourmoayed, Alireza Evaluation of plastic and elastic properties of magnesium plate in different rolling directions using correlation of digital images [Volume 23, Issue 1, 2021, Pages 56-72]
  • Pourmohammadi, Mostafa Experimental investigation of the effects of secondary flow injection on the output flow of the convergent-divergent nozzle at different beveled angles [Volume 24, Issue 1, 2022, Pages 45-56]
  • Poursaeidi, Esmaeil The investigation of change in thermal conductivity of porous coatings during the aging process [Volume 23, Issue 1, 2021, Pages 97-108]
  • Pour Yousefi, Mohammad Hassan Experimental Investigation of Pressure Distribution and Aerodynamic Coefficients in a Blade Cascade of an Airplane Engine Compressor [Volume 12, Issue 1, 2010, Pages 1-9]
  • Pouryoussefi, Gholam Hossein بررسی تجربی اثرات یخ‌زدگی روی پارامترهای آیرودینامیکی ایرفویل NACA 23012 [Volume 15, Issue 2, 2013, Pages 37-50]

Q

  • Qasemi Parizi, Mohammad Javad Damage detection and localization in a composite cylinder using FRF curvature method [Volume 19, Issue 2, 2017, Pages 55-65]

R

  • Radmanesh, Hamid Dynamic Modelling and Simulation of the Fuel Cell System for Supplying a Portion of Electric Energy of C-130 Hercules [Volume 16, Issue 1, 2014, Pages 1-16]
  • Raei, Jalal Identifying the Challenges of Innovation and Providing Solutions in Aircraft Industry by the Comparative Study of South Korea [Volume 17, Issue 2, 2015, Pages 10-22]
  • Ragani Lamooki, Jaber Numerical Analysis of the Flow around Two Airfoils in a Tandem Configuration Regarding Pressure Distribution [Volume 24, Issue 1, 2022, Pages 37-44]
  • Rahimi, Javad The investigation of change in thermal conductivity of porous coatings during the aging process [Volume 23, Issue 1, 2021, Pages 97-108]
  • Rahmati lish, Mostafa Optimization and Design of General Aviation Aircrafts Wing Using Non-Dominated Sorting Genetic Algorithms II [Volume 23, Issue 2, 2021, Pages 100-115]
  • Ramezanizadeh, Mahdi Investigation of Current Military Aircraft Accidents Investigation Model and Presenting a New Model, Considering the Newly Suggested Accidents Investigation Methods [Volume 17, Issue 1, 2015, Pages 35-52]
  • Ramezanizadeh, Mehdi Experimental Investigation of Pressure Distribution and Aerodynamic Coefficients in a Blade Cascade of an Airplane Engine Compressor [Volume 12, Issue 1, 2010, Pages 1-9]
  • Ramezanizadeh, Mehdi Application of Turbulence Model in Investigation of Film Cooling Problem over a Flat Plate [Volume 13, Issue 1, 2011, Pages 53-62]
  • Ramezani Zadeh, Mehdi Experimental Investigation of Applying the Novel Bean-Shaped Hole Geometry for the Film Cooling [Volume 25, Issue 1, 2023, Pages 40-54]
  • Ranjbar, Mohammad Ali Experimental Investigation of the Effects of Variation in Guide Vanes Pitch and Curvature on Quality of Discharged Flow [Volume 16, Issue 2, 2014, Pages 83-93]
  • Ranjbar, Mohammad Ali Optimum design of MR oleopneumatic shock absorber for airplane landing gear [Volume 22, Issue 2, 2020, Pages 171-196]
  • Ranjbar, Mohammad Ali Evaluation of plastic and elastic properties of magnesium plate in different rolling directions using correlation of digital images [Volume 23, Issue 1, 2021, Pages 56-72]
  • Ranjbar Saadatabadi, Abbas مطالعه موردی یخ‌زنی هواپیما در مسیرهای مختلف پروازی در ایران [Volume 15, Issue 2, 2013, Pages 15-24]
  • Rashtbarian, Mohammad Strength analysis of aluminum matting plates welded by TIG welding process for airfield repair [Volume 20, Issue 2, 2018, Pages 16-26]
  • Razavi Dehkordi, Seyed Mohammad Hossein Experimental investigation of the effects of secondary flow injection on the output flow of the convergent-divergent nozzle at different beveled angles [Volume 24, Issue 1, 2022, Pages 45-56]
  • RAZZAGHI, MOHAMMAD MAHDI Numerical study of boundary layer flow on downstream moving cascade blades [Volume 22, Issue 2, 2020, Pages 98-106]
  • Rezaee, Alireza Design, Simulation, and Evaluation of a Secure Air Navigation Based on Multipath, Adaptive Loading and Wireless Ad Hoc Networks [Volume 12, Issue 2, 2010, Pages 23-32]
  • Rezaee, Hossein The Technological Challenges in MAV Reconnaissance and the Method of Deal with Their Threats in the IRIAF [(Articles in Press)]
  • Rezaei, Mohsen Development of a Mushy State Simulated Annealing Algorithm for the Design of an Optimal Path Regulator Autopilot System [Volume 13, Issue 1, 2011, Pages 23-37]
  • Roozkhosh, Masoud Dynamic Modelling and Simulation of the Fuel Cell System for Supplying a Portion of Electric Energy of C-130 Hercules [Volume 16, Issue 1, 2014, Pages 1-16]
  • Roshaniyan, Jafar بهینه‌سازی طراحی چند موضوعی یک پرتابه، حامل پرنده بدون سرنشین پرتاب‌شونده از توپ [Volume 15, Issue 2, 2013, Pages 1-13]
  • Roshaniyan, Jafar Continuous Curvature Trajectory Planning Based on Dubins Path and Bézier Curve for UAVs [Volume 16, Issue 1, 2014, Pages 49-64]
  • ROSTSAMIFARD, DARIUSH Semi-empirical electromechanical model for pulsed plasma thrusters using two different approaches and comparison with experimental results [Volume 23, Issue 2, 2021, Pages 116-123]
  • Roudbari, Alireza طراحی کنترلر مرتبه‌بالا مقاوم تطبیقی برای سیستم آشوب نامعین [Volume 19, Issue 1, 2017, Pages 13-25]
  • Roudbari, Alireza Identification, Categories and risk assessment of the pilot training in job safety analysis [Volume 20, Issue 1, 2018, Pages 62-76]
  • Roudbari, Alireza The study of the degree of matching of pilot training provided by the University of Science and Technology, Shahid SATTARI with military and non - military systems on the different universities of the world [Volume 22, Issue 2, 2020, Pages 211-226]
  • Roudbari, Alireza A framework for determining pilots’ priorities using antropomethric charactristics [Volume 23, Issue 1, 2021, Pages 18-32]

S

  • Saadat Foumani, Mahmoud Dynamic Modeling of Rotor Flapping Dynamics of an Unmanned Helicopter and Investigation of Applicability of System Identification and Control using Approximate Model [Volume 19, Issue 2, 2017, Pages 1-11]
  • Sabet, Mohamadtaghi Design and Experimental Test of Alignment Algorithm based on Inertial Measurement Unit Outputs [Volume 20, Issue 1, 2018, Pages 13-24]
  • Sabzehparvar, Mahdi Multi-Objective Emergency Landing Trajectory Design Based on Motion Primitives [Volume 17, Issue 2, 2015, Pages 57-72]
  • Sabzehparvar, Mehdi The Study of Wing Damage Effect on Airplane Performance and Flight Dynamics [Volume 14, Issue 2, 2012, Pages 17-33]
  • Sabzehparvar, Mehdi Detection of foreign object debris (active and inactive) and cracks on the runway using machine vision techniques [Volume 24, Issue 1, 2022, Pages 16-26]
  • Sabzikaran, Esmaiel شناسایی و تحلیل اثر مهارت های مدیریتی بر ارتقاء بهره وری:مطالعه موردی صنایع پشتیبانی و نوسازی هلیکوپتری ایران (پنها) [Volume 15, Issue 1, 2013, Pages 1-12]
  • Sadati, Seyed Hosein Vibration fault detection of coaxial helicopter blade using wavelet transform and experimental learning based on neural network [(Articles in Press)]
  • Sadati, Seyed Hussein Aerial Target Tracking using Visual sensor and Laser finder [Volume 21, Issue 2, 2019, Pages 57-72]
  • Sadati, Seyyed Hosein Double-Body UAV Non-Linear Control System Design [(Articles in Press)]
  • Sadati, Seyyed Hossein Parametric Optimization of Augmented Proportional Navigation Law Considering Performance and Maneuvering Capabilities [Volume 17, Issue 1, 2015, Pages 65-74]
  • Sadati, Seyyed Hossein طراحی سیستم تقویت کننده کنترل هواپیما با استفاده از وارون‌دینامیک و شبکه‌عصبی [Volume 18, Issue 2, 2016, Pages 85-97]
  • Sadati, Seyyed Hossein Multi-UAV persistent surveillance with basic patrolling pattern in minimum revisit time [Volume 20, Issue 1, 2018, Pages 1-12]
  • Sadati, Seyyed Hossein Trajectory Tracking Control of Quadrotor Using State Space Feedback by Optimal Gain Tuning [Volume 22, Issue 2, 2020, Pages 146-156]
  • Sadati, Seyyed Hossein Optimal Control of UAV Fuel Consumption during Circular Loitering Flight [Volume 23, Issue 2, 2021, Pages 1-12]
  • Sadeghi, Mohammad Hossein Simulation of Milling Process in Roughening of Compressor Blade in Air Engine by Use of Finite Element Analysis [Volume 12, Issue 1, 2010, Pages 47-57]
  • Sadeghian Dehkord, Amir Airworthiness Classification of Unmanned Aircraft Systems Based on Risk Assessment of Operational Scenario [Volume 18, Issue 1, 2016, Pages 93-103]
  • Sadeghpour, Kazem Reduction of wing-related incidents and aircraft fuselage by replacing riveting process with friction stir spot welding process [Volume 20, Issue 2, 2018, Pages 27-38]
  • Sadr, Mohammad Homayoun Experimental and numerical study of the effect of temperature on the stability shape and curvature of bi-stable hybrid asymmetric plates [Volume 21, Issue 1, 2019, Pages 11-18]
  • Safari, Mina Air Flow Control at a Boundary Layer Using a Surface Dielectric Barrier Discharge Actuator [Volume 12, Issue 1, 2010, Pages 59-67]
  • Sajjadi, Seyyed Meysam The Effect of Blade Surface Roughness on the Transonic 4-stage Axial Compressor Performance [Volume 14, Issue 2, 2012, Pages 1-10]
  • Salamati Qamsari, Mostafa Sound transmission loss analysis of graphene platelets reinforced plate based on three-dimensional elasticity theory [Volume 22, Issue 2, 2020, Pages 258-268]
  • Salarieh, Hassan Dynamic Modeling of Rotor Flapping Dynamics of an Unmanned Helicopter and Investigation of Applicability of System Identification and Control using Approximate Model [Volume 19, Issue 2, 2017, Pages 1-11]
  • Salarpour, Setayesh Experimental study of two-dimensional and axisymmetric pneumatic contact grippers for limp and porous materials [Volume 23, Issue 2, 2021, Pages 124-135]
  • Salehi, Hassan تحلیل عددی نفوذ بمب‌های سنگرشکن با انرژی جنبشی غیر‌هسته‌ای (GBU) در سازه‌های زیرزمینی [Volume 17, Issue 2, 2015, Pages 23-43]
  • Salehi Shaygan, Amirhosein Optimizing the Parameters of the Missile Tactical Guidance Law based on the Heuristic Gravitational Search Algorithm [Volume 21, Issue 2, 2019, Pages 29-35]
  • Salehzadeh Nobari, Ali Damage detection and localization in a composite cylinder using FRF curvature method [Volume 19, Issue 2, 2017, Pages 55-65]
  • Salek, Ebrahim Experimental and numerical investigation of energy absorption of corrugated thin-walled tubes with lateral holes under axial impact [(Articles in Press)]
  • Salimi, Mohammadreza Application of Turbulence Model in Investigation of Film Cooling Problem over a Flat Plate [Volume 13, Issue 1, 2011, Pages 53-62]
  • Sarkhosh, Reza Determination of static strength and fracture of aged aircraft structure using non-destructive quasi-static indentation test [Volume 23, Issue 1, 2021, Pages 33-43]
  • Sarkhosh, Reza Design, manufacturing, and evaluation of mechanical and electrical properties of biodegradable epoxy/hemp composite produced by VARTM method [Volume 24, Issue 1, 2022, Pages 70-82]
  • Sarkhosh, Reza Numerical and Experimental Investigation of the variables influencing the thermal relaxation welded aluminum sheet [Volume 24, Issue 2, 2022, Pages 1-10]
  • Seddighi, Mohammad Performance Analysis and Optimization of Micro-turbine Combustion Chamber by Numerical Simulation [Volume 16, Issue 2, 2014, Pages 47-62]
  • Sepahi-Younsi, Javad Effects of MRD Concept on the Performance of a Supersonic Air Inlet [(Articles in Press)]
  • Setoudeh, Masoud Investigation of the Effect of DBD Plasma Actuator Location on Flow Control on Cascade of Axial Compressor [Volume 24, Issue 1, 2022, Pages 57-69]
  • Shahlaei, Naser Assessing the Readiness Degree of Organizations Working in Aerospace Industry for Transformation to Learning Organization [Volume 12, Issue 2, 2010, Pages 65-73]
  • Shahmiri, Farid Performance optimization of helicopter main rotor in maneuver using inverse simulation [Volume 24, Issue 2, 2022, Pages 37-51]
  • Shahmirzalo, Ali Evaluation of plastic and elastic properties of magnesium plate in different rolling directions using correlation of digital images [Volume 23, Issue 1, 2021, Pages 56-72]
  • Shahravi, Morteza Flatter analysis of cylindrical sandwich panel under follower force using generalized differential quadrature method [Volume 20, Issue 1, 2018, Pages 49-61]
  • Shahsafi, Hassan Investigation of a Method for Aerodynamic and Inertial Loading on Aircraft Finite Element Model Using Genetic Algorithm and Mapping [Volume 16, Issue 1, 2014, Pages 65-74]
  • Shahverdi, Hossein Damage detection and localization in a composite cylinder using FRF curvature method [Volume 19, Issue 2, 2017, Pages 55-65]
  • Shahverdi Moghadam, Hooman Improvement in a moving mesh algorithm and development of a central difference algorithm for the solution of unsteady flows [Volume 14, Issue 1, 2012, Pages 73-89]
  • Shams Taleghani, Arash Investigation of synthetic jet actuator position in delaying separation of a supercritical airfoil [Volume 24, Issue 1, 2022, Pages 83-96]
  • Sharafi, Ahmad Canard Geometry and Position Effects on the Wing Pressure Distribution of a Maneuverable Aircraft Model [Volume 12, Issue 1, 2010, Pages 11-31]
  • Sharafi, Ahmad Experimental and Numerical Investigation of Vortex Generator effects on Flow Pattern and Aerodynamic Coefficients of an Airplane Wing Model [Volume 13, Issue 2, 2011, Pages 1-16]
  • Sharafi, Ahmad Experimental Investigation of Grid Winglet Effects on Aerodynamic Characteristics of a Wing Model at Low Reynolds Number [Volume 16, Issue 2, 2014, Pages 1-14]
  • Sharafi, Ahmad بررسی تجربی جریان ناپایا حول یک مدل استوانه بهمراه سه صفحه عمود برآن [Volume 19, Issue 1, 2017, Pages 35-49]
  • Sharafi, Ahmad Design, fabrication and aerodynamic analysis of a remote- controlled small airship model [Volume 22, Issue 1, 2020, Pages 12-29]
  • Sharafi, Ahmad The Technological Challenges in MAV Reconnaissance and the Method of Deal with Their Threats in the IRIAF [(Articles in Press)]
  • Sharifi, Alireza Model-Aided Inertial Navigation Applied to Wind Estimation for a Fixed Wing UAV [(Articles in Press)]
  • Sharifi Ghaderi, Javad Evaluation of acoustic propagation characteristics in fatigue crack nucleation and growth for structural monitoring of aircraft propeller [Volume 25, Issue 1, 2023, Pages 67-75]
  • Sheikhy, Ali Akbar Experimental Calibration and Error Identification of Micro Electro-Mechanical Systems [Volume 17, Issue 1, 2015, Pages 1-9]
  • Shojaei Ghandshtni, Kambiz Development of a Mushy State Simulated Annealing Algorithm for the Design of an Optimal Path Regulator Autopilot System [Volume 13, Issue 1, 2011, Pages 23-37]
  • Shokri, Babak Air Flow Control at a Boundary Layer Using a Surface Dielectric Barrier Discharge Actuator [Volume 12, Issue 1, 2010, Pages 59-67]
  • Sobhani, Mohammad Kazem Experimental Investigation of The Flow Field Over a Non-Slender lambda Shaped Wing by Pressure Measurement [Volume 17, Issue 1, 2015, Pages 10-21]
  • Sohrab, Mohsen ردگیری مسیر پرواز پرنده بدون سرنشین با رویکرد H_∞ غیرخطی [Volume 15, Issue 2, 2013, Pages 25-35]
  • Soleimani, Hossein بررسی اثر جرم گسترده بر رفتار ارتعاشی ورق یک سر گیردار کامپوزیتی [Volume 18, Issue 2, 2016, Pages 1-15]
  • Soleimani, Hossein Damage detection and localization in a composite cylinder using FRF curvature method [Volume 19, Issue 2, 2017, Pages 55-65]
  • Soleimani Malekan, Meisam Optimizing the Parameters of the Missile Tactical Guidance Law based on the Heuristic Gravitational Search Algorithm [Volume 21, Issue 2, 2019, Pages 29-35]
  • Soltani, Mohammadreza Canard Geometry and Position Effects on the Wing Pressure Distribution of a Maneuverable Aircraft Model [Volume 12, Issue 1, 2010, Pages 11-31]
  • Soltani, Morteza Development of a Procedure for Re-engineering of the Central Wing Component of a Commercial Aircraft [Volume 18, Issue 2, 2016, Pages 40-53]
  • Soltanpour, Mohammadreza Stabilization of the F-8 Fighter Aircraft Using Model-Based Predictive Control [Volume 20, Issue 2, 2018, Pages 1-15]
  • Soltanpour, Mohammadreza Adaptive Fuzzy Slide Mode Control Design with Asymptotic Sliding Surface for MEMS Vibrational Gyroscope System in the Presence of Uncertainty [Volume 20, Issue 2, 2018, Pages 39-55]

T

  • Taeibi Rahni, Mohammad Numerical Study of Mass Flow and Septum Position Effects on Thrust Vectoring and Flow Structure of an ACHEON Nozzle [Volume 24, Issue 1, 2022, Pages 159-176]
  • Taghavi, Seyed Ali Investigation, Simulation and Comparison of the Effect of Electrostatic Discharge (ESD) in Military Aircraft with Metal body, Composite and Combined mode [Volume 25, Issue 1, 2023, Pages 55-66]
  • Taghavi, Seyyed Hossein Improvement of Accuracy by Pre-launch Compensation with Earth’s Gravity and Rotation Rate for SINS [Volume 16, Issue 1, 2014, Pages 95-104]
  • Taghipoor, Hossein Experimental investigation of glass/hemp hybrid composite plates under low-velocity impact loading [Volume 24, Issue 2, 2022, Pages 125-136]
  • Taghipour, Faezeh Developing a media strategy in order to manage the air accident crisis [Volume 24, Issue 1, 2022, Pages 111-140]
  • Taghizadeh, Farhad ساخت تستر نمایشگر و بررسی صحت عملکرد سیستم اجتناب از برخوردهای هوایی [Volume 15, Issue 2, 2013, Pages 75-85]
  • Taghizadeh, Mohamadreza Vibrational Response of the Pilot Biodynamic Models in Various Flight Maneuver [Volume 21, Issue 1, 2019, Pages 44-56]
  • Taheri, Ehsan Designing the rapidly exploring random tree path planning algorithm for the vertical take-off and landing vehicle on the processor-in-the-loop test platform [Volume 23, Issue 1, 2021, Pages 86-96]
  • Talaee, Siroos Comparison of Particle Filter Pperformance with Extended and Hybrid Extended Kalman Filter in INS/GPS Data Fusion [Volume 22, Issue 2, 2020, Pages 41-55]
  • Talebi, Heydarali The Study of Wing Damage Effect on Airplane Performance and Flight Dynamics [Volume 14, Issue 2, 2012, Pages 17-33]
  • Talebitooti, Roohollah Sound transmission loss analysis of graphene platelets reinforced plate based on three-dimensional elasticity theory [Volume 22, Issue 2, 2020, Pages 258-268]
  • Tarabi, Abbas Numerical calculation of the noise generated by air flow on different geometries [Volume 19, Issue 1, 2017, Pages 62-73]
  • Tavakoli, Farhad Three-Dimensional Midcourse Guidance with Moving Waypoints [Volume 14, Issue 1, 2012, Pages 47-56]
  • Tayebi Rahni, Mohammad Application of Turbulence Model in Investigation of Film Cooling Problem over a Flat Plate [Volume 13, Issue 1, 2011, Pages 53-62]
  • Tohidlo, Majid Investigation, Simulation and Comparison of the Effect of Electrostatic Discharge (ESD) in Military Aircraft with Metal body, Composite and Combined mode [Volume 25, Issue 1, 2023, Pages 55-66]

V

  • Vahdatazad, Abazar Energy absorption investigation of cylindrical tube filled by functionally graded foam in quasi static test [Volume 21, Issue 1, 2019, Pages 1-10]
  • Vahdat Azad, Abazar بررسی اثر جرم گسترده بر رفتار ارتعاشی ورق یک سر گیردار کامپوزیتی [Volume 18, Issue 2, 2016, Pages 1-15]
  • Vahdat Azad, Nader The energy absorption characteristics of tapered honeycomb sandwich cylindrical columns under axial crushing loads [Volume 17, Issue 2, 2015, Pages 1-9]
  • Vahdat Azad, Nader بررسی اثر جرم گسترده بر رفتار ارتعاشی ورق یک سر گیردار کامپوزیتی [Volume 18, Issue 2, 2016, Pages 1-15]
  • Vahdat Azad, Nader Energy absorption investigation of cylindrical tube filled by functionally graded foam in quasi static test [Volume 21, Issue 1, 2019, Pages 1-10]
  • Vahedi, Khodadad Experimental and numerical investigation of energy absorption of corrugated thin-walled tubes with lateral holes under axial impact [(Articles in Press)]
  • Vahidinia, Farhad Investigation of energy and exergy performance of parabolic trough solar collector with wind speed variations [Volume 23, Issue 1, 2021, Pages 109-124]
  • Vali, Ahmadreza Nonlinear Robust Guidance in direction and perpendicular to the LOS for Intercepting Moving Targets [Volume 14, Issue 1, 2012, Pages 37-46]
  • Valipour, Farajollah Non [Volume 14, Issue 2, 2012, Pages 35-48]
  • Vaseli khabbaz, Mahmoud Increasing the accuracy of satellite orbit estimation using magnetic field models and Kalman filter expanded [Volume 24, Issue 2, 2022, Pages 94-124]
  • Vaseli Khabbaz, Mahmoud تحلیل عددی نفوذ بمب‌های سنگرشکن با انرژی جنبشی غیر‌هسته‌ای (GBU) در سازه‌های زیرزمینی [Volume 17, Issue 2, 2015, Pages 23-43]
  • Veysi, Mohammad Stabilization of the F-8 Fighter Aircraft Using Model-Based Predictive Control [Volume 20, Issue 2, 2018, Pages 1-15]

Y

  • Yazdani, Ali Effect of Anodizing Conditions on Wear Resistance, Surface Hardness and Change of Dimensions on Aircraft Aluminum Alloys [Volume 12, Issue 2, 2010, Pages 45-54]
  • Yazdani, Ali An investigation on the effect of chromating and anodizing conversion coatings on corrosion resistance in 2024 and 7075 aircraft aluminum alloys [Volume 14, Issue 1, 2012, Pages 27-36]
  • Yazdani, Mehdi Solving the Multi-objective of Aircraft Landing Scheduling Problem in Multi-Band Mode [Volume 21, Issue 1, 2019, Pages 19-34]
  • Yousefi, Yousef The investigation of change in thermal conductivity of porous coatings during the aging process [Volume 23, Issue 1, 2021, Pages 97-108]

Z

  • Zadsirjan, Saeedreza Numerical Simulation and Survey of Heat Transfer of Flow Mixing in a Lobed Mixer of a Turbofan Engine [Volume 23, Issue 1, 2021, Pages 160-174]
  • Zahedi, Javad Analytical Model-based Fault Detection in Air-launched Systems Using Statistical Markov Models [Volume 19, Issue 2, 2017, Pages 29-43]
  • Zahiri, Parisa Evaluation the efficiency of Iran's airports by applying the two-stage Network of Data Envelopment Analysis method [Volume 19, Issue 2, 2017, Pages 12-28]
  • Zahiripour, Seyed Ali Investigating the effect of semi-analytical initial alignment error on the efficiency of inertial navigation system [(Articles in Press)]
  • Zardashti, Reza ردگیری مسیر پرواز پرنده بدون سرنشین با رویکرد H_∞ غیرخطی [Volume 15, Issue 2, 2013, Pages 25-35]
  • Zardashti, Reza Robust Guidance Law Optimization for a Smart Projectile [Volume 21, Issue 2, 2019, Pages 36-45]
  • Zardashti, Reza MIDCOURSE GUIDANCE A PROJECTILE OPTIMIZATION USING PARTICLE SWARM ALGORITHM [Volume 22, Issue 1, 2020, Pages 46-53]
  • Zardashti, Reza Control design of an aerial refueling system using a combination of machine vision and GPS taking into account the vortex flow effects of the refueling aircraft [Volume 24, Issue 2, 2022, Pages 167-185]
  • Zarei, Arman Effect of Anodizing Conditions on Wear Resistance, Surface Hardness and Change of Dimensions on Aircraft Aluminum Alloys [Volume 12, Issue 2, 2010, Pages 45-54]
  • Zarei, Hamidreza Re-engineering of a Helicopter Structural Components Using Laminated Composite Materials Based on Crashworthiness Concepts [Volume 12, Issue 2, 2010, Pages 33-43]
  • Zarei, Hamidreza Development of a Procedure for Re-engineering of the Central Wing Component of a Commercial Aircraft [Volume 18, Issue 2, 2016, Pages 40-53]
  • Zarei, Hamidreza Experimental investigation of residual strength of aged aircrat structures [Volume 19, Issue 2, 2017, Pages 66-76]
  • Zarei, Hamidreza Designing and fabrication a corrosion protective coating for the aircraft structures [Volume 22, Issue 1, 2020, Pages 54-65]
  • Zarei, Hamidreza Experimental analysis of strength of coated nickel base superalloy Rene-80 [Volume 22, Issue 2, 2020, Pages 56-65]
  • Zarei, Hamidreza Determination of static strength and fracture of aged aircraft structure using non-destructive quasi-static indentation test [Volume 23, Issue 1, 2021, Pages 33-43]
  • Zarei, Majid Nonlinear Robust Guidance in direction and perpendicular to the LOS for Intercepting Moving Targets [Volume 14, Issue 1, 2012, Pages 37-46]
  • Zarghami, Hamid Reza A framework for determining pilots’ priorities using antropomethric charactristics [Volume 23, Issue 1, 2021, Pages 18-32]
  • Zarghami, Hamid Reza Recognizing and prioritizing paving methods for the flight surfaces of Iranian airports using multi-criteria decision making (MCDM) techniques [(Articles in Press)]
  • Zarghami, Hamid Reza Identifying and Prioritizing Anthropometric Characteristics for Enhancing Performance of Pilots in Aircraft Cockpit [Volume 25, Issue 1, 2023, Pages 28-39]
  • Zibafar, Amirreza Optimization and Design of General Aviation Aircrafts Wing Using Non-Dominated Sorting Genetic Algorithms II [Volume 23, Issue 2, 2021, Pages 100-115]